Table of Contents
Advertisement
ENVR8304D-8CH
6.8.7 Miscellaneous
You can upgrade the latest firmware, restore the factory default settings to the NVR, upload /
save the NVR configuration settings from / to the USB or change the language in this setup
menu.
Figure 6-55
Firmware
Current Firmware Version: Shows the current firmware version of the NVR.
Upgrade: Click to upgrade the latest firmware. Note you will need to restore the firmware
file to the USB flash device and then connect the USB flash device to the NVR.
Configurations
Load Factory Default: Click to restore the NVR to factory default settings. The User Account,
Network IP Settings, and Time settings will not be affected.
Load From USB: Click to upload the NVR configurations restored in the USB flash device.
Save To USB: Click to save the NVR configurations to the USB flash device.
Language: Choose which language the NVR uses.
Allowed Remote Reboot: Check the box to enable restarting the NVR via the Network.
114
Advertisement
Table of Contents
