Checking The Dynamic Ip Address - EverFocus ENVR8304D-8CH User Manual

2.6 Checking the Dynamic IP Address

You can look up the IP address and access the Web interface of the NVR using the IP Utility
(IPU) program, which is contained in the CD. It can also be downloaded from EverFocus'
Website: http://www.everfocus.com/tools.cfm. Please connect the NVR in the same LAN of your
computer.
1. Install and then start the IPU program
2. IPU will automatically search the IP devices connected in the LAN. The default network
values of the IP devices will be displayed. By default, the network protocol of the IP device
is DHCP.
3. To configure the network settings, select an IP device and then click Login/Multi Login.
. The following dialog box appears.
Figure 2-26
Figure 2-27
26
ENVR8304D-8CH