Table of Contents
Advertisement
Preset: Click the Preset button to set up the Preset Position or the Auto Pan function.
Preset: You can configure up to 192 preset positions in this field.
To set up a Preset Positions:
1. Adjust the camera view to a desired position using the direction button. You can select the
pan / tilt speed from the Speed drop-down list for controlling the direction buttons. Adjust
zoom, focus and Iris if necessary.
2. To set up the current camera view as a preset position, select a preset number from the
Preset No drop-down list for the current camera view.
3. Optionally set up a title for this preset position in the Title field .Click Apply to save the title
name or click Cancel to cancel the current changes.
4. Click Set to save the current position as the Preset Number you have selected.
5. Follow Step 1 to 4 to set up another preset position. You can click the Next button to go to
the next page and then click the Preset No drop-down list to select a number. Or click on
the number in the Page field to select a preset number.
To activate the Preset function on the PTZ Live View window, click the PTZ
Menu Bar. Click the Preset button, click on the numeric buttons to select a Preset number and
then click the Go button. The selected Preset position should be displayed on the camera view.
Please refer to 7.6 PTZ for detailed instructions.
Figure 7-22
133
ENVR8304D-8CH
icon on the
Advertisement
Table of Contents
