Remote Control Unit (Tascam Rc-Cd200Il) - Tascam CD-200iL Owner's Manual

2 – Names and functions of parts

Remote control unit (TASCAM RC-CD200iL)

Number (0-9) buttons
1
Use the number (0-9) buttons to select tracks by their track
numbers.(See "Selecting by track number" on page 21.)
Track numbers can have a maximum of two digits for audio
CDs and a maximum of three digits for data CDs.
INTRO CHECK button
2
When playing back or paused and the current source
is , press and hold this button to start intro check
-CD-
playback. During intro check playback, press this button
again to return to ordinary playback mode.(See "Intro check
function" on page 26.)
DISPLAY button
3
When the current source is
type of time and text information shown on the display.(See
"Time and text information display" on page 25.)
PLAY MODE button
4
When the current source is
playback mode. The three playback modes are continuous,
shuffle and programmed.(See "Playback modes" on page
20.)
When the current source is
iPod/iPhone shuffle mode.(See "iPod/iPhone control" on
page 27.)
12
TASCAM CD-200iL
, press to change the
-CD-
, press to change the
-CD-
, press to change the
-DOCK-
SOURCE SELECT button
5
Press to cycle through the current sources in the following
order.(See "Selecting the output source (current source)" on
page 18.)
Current source selection order
NOTE
and cannot be selected when no corre-
-DOCK- -AUX-
sponding device is connected.
PITCH button
6
Press to turn the CD playback pitch control function on and
off.(See "Pitch control playback" on page 26.)
FOLDER g/t buttons
7
When the current source is
use these buttons to change the folder that will be played
back.(See "Folder playback (data CDs)" on page 21.)
When the current source is
(skip between) albums.(See "iPod/iPhone control" on page
27.)
m/. and ,// buttons
8
Use these buttons to select (skip between) tracks.
Press and hold to search backward/forward.
OPEN/CLOSE button
9
Press to open and close the disc tray.
PROGRAM EDIT button
0
When the current source is
confirm and edit program settings.(See "Programmed
playback" on page 22.)
REPEAT button
q
When the current source is
turn the repeat playback function on and off and to select
the repeat playback mode.(See "Repeat playback" on page
24.)
When the current source is
to change the repeat playback mode.(See "iPod/iPhone
control" on page 27.)
−/+ buttons
w
Use these to set the pitch control value used during CD
playback.(See "Pitch control playback" on page 26.)
STOP button
e
When the current source is
CD playback.
In program setting mode, press this button when a track is
selected to cancel the selection, enabling the selection of
another track.(See "Setting the program" on page 22.)
When a track can be added to a new program step, press
this button to clear the entire program.(See "Clearing the
program" on page 24.)
PLAY/PAUSE button
r
When playback is stopped or paused, press to start playback.
Press during playback to pause.
and a data CD is loaded,
-CD-
, use these to select
-DOCK-
, use this to make,
-CD-
, press this button to
-CD-
press this button
-DOCK-,
, press this button to stop
-CD-