Wiesbaden-Erbenheim, Germany declare in own Please record the model number and serial number and responsibility, the TEAC product described in this retain them for your records. manual is in compliance with the corresponding technical standards. Model number Serial number TASCAM CD-200iL...
If the battery fluid leaks, wipe away any fluid on the battery compartment before inserting new batteries. • Do not disassemble a battery. The acid inside the battery could harm skin or clothing. TASCAM CD-200iL...
1 – Introduction • CD-DA format discs are sometimes called “audio CDs. ” Thank you for your purchase of the TASCAM CD-200iL CD Player / iPod Dock. • CDs that contain audio files in MP2, MP3 or WAV formats are Before connecting and using the unit, please take time to read called “data CDs.
Precautions for placement About discs • The operating temperature should be between 5°C and In addition to audio CDs (CD-DA), the CD-200iL can play CD-R 35°C (41°F and 95°F). and CD-RW discs on which audio CD, MP3, MP2 or WAV format files are recorded.
Use the PHONES knob to adjust the headphone output level. CAUTION Use the PHONES knob to minimize the volume before connecting headphones. Failure to do so could cause a sudden burst of loud noise, which might result in hearing damage, for example. TASCAM CD-200iL...
CD pitch control value. (See “Pitch control playback” on page 26.) When the current source is , use these buttons -DOCK- to skip among the albums on the iPod or iPhone (select albums). (See “iPod/iPhone control” on page 27.) TASCAM CD-200iL...
INTRO “Intro check function” on page 26.) Programmed playback mode indicator appears when in programmed playback mode. MEMORY This indicator blinks when the program is being set. TASCAM CD-200iL...
2 – Names and functions of parts Remote control unit (TASCAM RC-CD200iL) SOURCE SELECT button Press to cycle through the current sources in the following order.(See “Selecting the output source (current source)” on page 18.) Current source selection order NOTE...
3 – Preparations Making connections Examples of connections that can be made with a CD-200iL are shown below. Precautions before making connections • Before connecting other devices, read their operation manuals carefully and connect them properly. • Turn the power OFF or set the power to standby for this unit and all units to be connected to it.
Lightning connector will be the one that can be controlled and recharged. • See the TASCAM website (http://tascam.com/ or http://tascam.eu/ for Europe) for details about compatible devices.
PUSH OPEN. CAUTION When closing the iPod dock, always pull the unlocking lever on the top of the iPod dock to unlock it when pressing PUSH OPEN on the front of the dock. TASCAM CD-200iL...
• Before connecting or disconnecting with the AUX IN jack, set the current source to (not ) or -CD- -DOCK- -AUX- turn this unit off. Direction of iPod/iPhone insertion and removal TASCAM CD-200iL...
– Program • Use the remote control within the following range. – Current folder (for data CDs) Remote Sensor Operation distance Directly in front: Within 7 meters 15° left or right: Within 7 meters TASCAM CD-200iL...
Moreover, if the iPod or iPhone is playing when the current source is changed from , playback -DOCK- -AUX IN- will pause. NOTE Even when the current source is changed, CD playback mode settings, the current folder selection and program contents are not erased. TASCAM CD-200iL...
“.wav” file extension. • Data CDs with more than 999 files or 512 folders might not play correctly. • Depending on disc conditions, this unit might not be able to play some discs, or skips in the sound might occur. TASCAM CD-200iL...
[SOURCE SEL] button on the main unit or the PLAY MODE button on the remote control, the selected mode is shown on the main display area as follows. Continuous playback mode: CONTINUE Shuffle playback mode: SHUFFLE Programmed playback mode: PROGRAM TASCAM CD-200iL...
• When the folder playback function is on, only tracks in the and the display returns to its previous state. current folder can be added to a program. NOTE The number (0-9) buttons cannot be used to select a track when in program or shuffle playback mode. TASCAM CD-200iL...
Display when using audio CD Display when using data CD NOTE If the program has already been set, the track number and playback time of the track set for program step 01 are shown. TASCAM CD-200iL...
“Clearing the program” on page 24.) • If you try to add more than 99 tracks, a error PGM FULL message appears. Only 99 tracks can be added. TASCAM CD-200iL...
• If repeat playback is turned ON when stopped, repeat playback begins when the PLAY/PAUSE button is pushed. NOTE • The repeat playback function’s ON/OFF state is retained Opening the disc tray also clears the program. even when the power is turned OFF. TASCAM CD-200iL...
When stopped, you can still change the display mode from the track elapsed time to the album title. When stopped, you can switch to the album title (current folder). TASCAM CD-200iL...
When the pitch control function is on, some devices might not be able to receive this unit’s digital output. • The pitch control function cannot be used with an iPod or iPhone. TASCAM CD-200iL...
Doing this makes it possible to control the iPod or iPhone from Front panel and remote control (TASCAM RC-CD200iL) buttons this unit and the TASCAM RC-CD200iL remote control, as well as can be used to control the iPod or iPhone as follows.
Error messages If one of the following error messages is shown, please refer to the Response column and try to resolve it. If you are still unable to correct the problem, please contact the nearest retailer or TASCAM representative. Message...
7 – Troubleshooting If you have problems with your system, look through this chart and see if you can solve the problem yourself before calling the nearest retailer or TASCAM representative. No power The iPod or iPhone cannot be connected to the iPod dock.
IEC-60958-3 standard for consumer applications (S/PDIF) Audio performance Frequency Response 20 Hz - 20 kHz ±1.0 dB (during playback, JEITA) Signal-to-Noise Ratio (S/N) More than 90 dB (during playback, JEITA) Total Harmonic Distortion Less than 0.01% (during playback, JEITA) TASCAM CD-200iL...
8 – Specifications Dimensions • Illustrations and other depictions may differ in part from the actual product. • Specifications and external appearance may be changed without notification to improve the product. TASCAM CD-200iL...
Page 32
CD-200iL TEAC CORPORATION http://tascam.jp/ Phone: +81-42-356-9143 1-47 Ochiai, Tama-shi, Tokyo 206-8530 Japan TEAC AMERICA, INC. http://tascam.com/ Phone: +1-323-726-0303 7733 Telegraph Road, Montebello, California 90640 USA TEAC MEXICO, S.A. de C.V. http://teacmexico.net/ Phone: +52-55-5010-6000 Río Churubusco 364, Colonia Del Carmen, Delegación Coyoacán, CP 04100, México DF, México TEAC UK LIMITED http://tascam.eu/...