Table of Contents
Advertisement
4 – CD playback
Pitch control playback
With pitch control playback, this unit can alter the pitch (sound
frequency and playback speed) of CDs during playback.
Follow the procedures below to use pitch control playback.
1. Press the REPEAT [PITCH ON/OFF] button while pressing
and holding the DISPLAY [SHIFT] button on the main unit
or press the PITCH button on the remote control to turn
pitch control ON.
2. Use the FOLDER g/t [PITCH −/+] buttons while pressing
and holding the DISPLAY [SHIFT] button on the main unit
or use the PITCH –/+ buttons on the remote control to set
the pitch in 0.5% units in a range of ±14.0%.
To turn pitch control playback OFF:
8
Press the REPEAT[PITCH ON/OFF] button while pressing
and holding the DISPLAY [SHIFT] button on the main unit
or press the PITCH button on the remote control.
NOTE
• During playback, turning pitch control playback ON or OFF
might cause the playback sound to skip momentarily.
• Using pitch control playback with a data CD (MP3, MP2,
WAV) sometimes causes the playback sound to skip.
• When the pitch control function is on, digital output is
possible, but the sampling frequency will be changed by
an amount equivalent to the pitch control value. When the
pitch control function is on, some devices might not be able
to receive this unit's digital output.
• The pitch control function cannot be used with an iPod or
iPhone.
26
TASCAM CD-200iL
Intro check function
The intro check function can be used to automatically play back
the first 10 seconds of every track on a CD one after another.
During playback or when stopped, press and hold the main
unit PLAY MODE/INTRO CHECK [SOURCE SEL] button or
the remote control INTRO CHECK button to start intro check
playback. The
indicator appears on the display when
INTRO
this function is active.
• During intro check playback press a main unit SEARCH
m/, [.//] button or remote control search
(m/. or ,// ) button to skip to the previous or
next track.
• To stop intro check playback, press the main unit or remote
control STOP button.
Turning the intro check function off
8
During intro check playback, press and hold the main
unit PLAY MODE/INTRO CHECK [SOURCE SEL] button or
remote control INTRO CHECK button again to return to
ordinary playback mode. The
from the display.
NOTE
• The intro check playback function can also be used with
data CDs.
• The intro check playback function can also be used during
programmed playback and folder playback modes.
• The intro check playback function cannot be used with an
iPod or iPhone.
indicator disappears
INTRO
Advertisement
Table of Contents
