Remote Control Unit; Preparation Of Remote Control Unit; Inserting Batteries; When To Replace The Batteries - Tascam MD-CD1mkII Owner's Manual

2 – Remote Control Unit
Preparation of Remote Control
Unit

Inserting batteries

1 Open the cover on the back of the remote control.
2 Insert two AA batteries with the correct ±
orientations.
3 Close the cover.
NOTE
The batteries are not supplied for Taiwan.

When to replace the batteries

Replace both batteries with new ones when the range
of the remote control becomes short or if the buttons
become unresponsive.

Precautions about using batteries

Misuse of batteries could cause them to leak, rupture or
otherwise be damaged. Please read and abide by the
precautions on the battery labels when using them. See
page 5 of this manual for additional precautions.
12
TASCAM MD-CD1MKIII
Precautions about using the remote
control
When using other devices controlled by infrared rays,
•
use of this remote control might operate these devices
by mistake.
Use the remote control within the following range.
•
Remote sensor
15˚ 15˚
Operation distance
Directly in front: Within 7 meters
15˚ left or right: Within 7 meters