Remote Control Unit - Tascam CD-355 Owner's Manual

PLAY (y)
K
Use this button to start playback.
TRACK NO.
L
Use these buttons to select a track number.
For instance, to select track number 35, press "3" and "5".
PROGRAM
M
Use this button to enter the program mode. In program
mode, use this button to enter selections.
SEARCH (m/,)
N
During playback, use these buttons to search the part you
want to listen to.
SHUFFLE
O
Use this button for shuffle playback.
TIME
P
During playback, use this button to change the time display.
REPEAT
Q
Use this button to select repeat modes.
INTRO CHECK
R
Use this button to start the intro check playing.
PROGRAM CHECK
S
Use this button to check programed contents.
CLEAR
T
Use this button to clear a program.
SKIP (.//)
U
Use these buttons to skip tracks.

Remote Control Unit

The provided Remote Control Unit allows the unit to be operated
from a distance.
When operating the remote control unit, point it towards the
REMOTE SENSOR on the front panel of the unit.
< Even if the remote control unit is operated within the effective
range, remote control operation may be impossible if there
are any obstacles between the unit and the remote control.
< If the remote control unit is operated near other appliances
which generate infrared rays, or if other remote control
devices using infrared rays are used near the unit, it may
operate incorrectly. Conversely, the other appliances may
operate incorrectly.
Battery Installation
1. Remove the battery compartment cover.
2. Insert two "AA" dry batteries. Make sure that the batteries
are inserted with their positive "+" and negative "_" poles
positioned correctly.
3. Close the cover.
Battery Replacement
If the distance required between the remote control unit and
main unit decreases, the batteries are exhausted. In this case
replace the batteries with new ones.
Precautions concerning batteries
< Be sure to insert the batteries with correct positive "+" and
negative "_" polarities.
< Use batteries of the same type. Never use different types of
batteries together.
< Rechargeable and non-rechargeable batteries can be used.
Refer to the precautions on their labels.
< When the remote control unit is not to be used for a long
time (more than a month), remove the batteries from the
remote control unit to prevent them from leaking. If they leak,
wipe away the liquid inside the battery compartment and
replace the batteries with new ones.
< Do not heat or disassemble batteries and never dispose of old
batteries by throwing them in a fire.

355
TASCAM CD-