Table of Contents
Advertisement
3. Connect the iPod or iPhone with a Lightning connector.
iPod or iPhone with a Lightning connector
Lightning connector
Connecting an iPod or iPhone with a 30-pin Dock
8
connector
1. Push the iPod dock in the center where it says PUSH OPEN
to unlock the iPod dock.
2. Pull the iPod dock out until you can use the Lightning
connector and it locks.
3. Pull the unlocking lever to unlock the iPod dock, and then
pull the dock forward to the CLICK STOP position.
CLICK STOP position
3 – Preparations
4. Insert a dock adapter that is suitable for your iPod or
iPhone with a 30-pin Dock connector into the 30-pin Dock
connector section, and then connect that iPod or iPhone.
iPod or iPhone with a 30-pin Dock connector
Dock adapter
30-pin Dock connector
NOTE
When connecting an iPod or iPhone with a 30-pin Dock
connector always insert a dock adapter suitable for your
iPod or iPhone into the connector area. Dock adapters
are not included with this product. Use the dock adapter
included with your iPod or iPhone or a commercially-
available Apple Universal Dock Adapter made by Apple Inc.
CAUTION
• Do not move the iPod dock left, right, up or down when it is
pulled out.
• Do not place anything other than an iPod or iPhone on the
iPod dock when it is pulled out.
Closing the iPod dock
After removing the iPod or iPhone, while pulling the unlocking
lever on top of the iPod dock, push the front of the dock where
it says PUSH OPEN.
CAUTION
When closing the iPod dock, always pull the unlocking lever
on the top of the iPod dock to unlock it when pressing PUSH
OPEN on the front of the dock.
15
TASCAM CD-200iL
Advertisement
Table of Contents
