System-Wide Speaker Call - Siemens OpenStage 20 E User Manual

Enhanced phone functions
Step by Step
j
Enter code!
52

System-wide speaker call

You can place a speaker call from your phone to any in-
ternal party with a telephone equipped with speaker-
phone mode or a loudspeaker.
Speaker call to a variable destination
The destination party is contacted via their internal
phone number.
^
Lift the handset.
or
n
Press the key and enter speakerphone mode
(OpenStage 20/20 G only).
Enter the system code for "Speaker call-one-way" (con-
tact the relevant service personnel if necessary).
j
Enter the internal number of the party.
A connection is immediately established to this destina-
tion station's loudspeaker if
• the station is not busy
• the handset has not been lifted
• "Speaker call protect" is not activated
Z
The caller hears a confirmation tone when the connec-
tion is established and they are free to start speaking.
^
The called party can accept the connection by lifting the
handset.
n
When the called party presses the speaker key, the con-
nection is lost.
The same number of speaker calls and normal
connections is possible.