Audio Control Menu - Kenwood DNX7120 Instruction Manual

Audio Control Menu
Displays the Audio Control menu to set the sound
effect function of this unit.
D
Display the control screen of any source
Press several times until the control screen
appears.
D
Display the Audio Control menu
D
Select the Audio Control item
OJ
Switches to the selected Audio Control
screen.
86
!:~t
DNX7120/DDX712/DDX7032
Audio Control
You can adjust the front/rear and right/left audio
balance.
D
Display Audio Control screen
Touch in the "Audio
Control Menu" screen (page 86).
D
Set the each item
OJ
Moves to the "Audio Control 2" screen.
III
Adjust the front/back and left/right volume
around the touched area.
W
Adjusts the right and left volume balance.
!1J
Adjusts the front and rear volume balance.
[[] Turns the Loudness control function On or
Off.
If turned
"On'~
high and low tones are
automatically enhanced during low volume.
W
Displays the present source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
II]
Returns to the "Audio Control Menu" screen.
W
Returns to the "Audio Control 1" screen.
lID
Adjusts the volume of the present source
based on the difference level of original
volume.