Audio Control Menu - Kenwood DNX7140 Instruction Manual

Audio Control Menu
Audio Control
I
Displays the Audio Control menu to set the sound
effect function of this unit.
You can adjust the front/rear and right/left audio
balance.
• If you have increased the volume first, then reduced
the volume using the "VOL. Offset", the sound
generated if you suddenly switch to another source
may be extremely loud.
[Subwoofer Level] Adjusts the subwoofer
volume.
[Bass Boost] Sets the amount of bass boost
"OFF"/ "Step 1"/ "Step2"
[Stream Information] Displays the present
source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
IT]
Adjust the front/back and left/right balance
of the volume by touching the Adjust screen.
[....],
[~]
Adjusts the right and left volume
balance.
[A], [T] Adjusts the front and rear volume
balance.
[VOL.Offset] Finely adjust the volume of the
current source to minimize the difference in
volume between different sources.
~
~
D
Display the Audio Control screen
Touch
[OJ>
[~J >
[Audio Cantrall (page 59)
B
Set the each item
Item PCl9J:
1
[Audio
Cony~IL
___ _ __ 59 _
[Equalizer] _ .
29 . . _. _
L
j~i~==_____ ~~
_
JZo~~ C~t.rQlL .
§l _
[Space
Enhan~eIL
61
[Po~g0L .__ ~ .. _
D
Display the Source Select Screen
D
Display the Audio Control menu
In this manual, the above selection is indicated
as:
Touch
[OJ>
[«~
l
I
D
se.l~c~ t~e ~UdiO
Control item
English i:
59