Kenwood DNX7120 Instruction Manual page 90

~;;'~t~~1!;· '1;!~1.!1;t;,.
.;;L;1;!!"·
,.,;it.1Z!:;f~./
,.-;!;_·!.~1!·'·
,
'";·;~:;!'1!1/
/ ~;!.i!.'·'7,~/ , . .
#J"!;i11:f;!;
/I!-""_""',f,/ ,..
,.,,!... . ..
J,..,;.;
"'i:';!~ote Con~r
.,BP'
-,t..
,f·
,;I~:!11!J// '~,'/
/I~";!'~~/
(~~,
...,!/
',\;" This unit can be operated using the Remote Controller (DNX7120; RC-DV330, DDX712/DDX7032; RC-DV340)
supplied with the unit.
&
°
Put the Remote Controller in a place where it will not move during braking or other operations. A dangerous situation could
result, if the Remote Controller falls down and gets wedged under the pedals while driving.
°
Do not place the battery near an open flame or heat source. This may cause the battery to explode.
• Do not recharge, short, break up or heat the battery or place it in an open fire. Such actions may cause the battery to leak
fluid. If spilled fluid comes in contact with your eyes or on clothing, immediately rinse with water and consult a physician.
• Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a
physician.
Battery installation
Remote Controller mode switch
,
RC-DV340
AUDmode
Switch to this mode when
controlling a selected source or
l
tuner source, etc.
DVDmode
AUD lLrswitch to this mode when playing
°
DVDs or CDs etc. with the player
DVD'1
11
integrated in this unit.
TV.J-r
TV mode
NAVI'ijLO
This is switched when controlling
TV.
RETURN
NAVI mode
II
This is switched when controlling
Navigation unit.
r
'
AUDmode
Switch to this mode when
controlling a selected source
or tuner source, etc.
AUD
DVD._DVD mode
T
Vl
SWitch to thiS mode when
playmg DVDs or CDs etc.
with the player integrated in
r1b.
this unit.
lAl
TV mode
This is switched when
controlling TV.
The functions operated from the remote
controller differ depending on the position of the
mode switch.
RC-DV330
)
If the Remote Controller operates only over shorter
distances or does not operate at all, it is possible that
the batteries are depleted. In such instances, replace the
both batteries with new ones.
Q
~
Use two IAAA I /"R03"-size batteries.
Insert the batteries with the
+
and - poles aligned
properly, following the illustration inside the case.
Q
~
• The position of the remote control mode switch is
indicated in the title of each mode, e.g., "(AUD mode)".
When controlling a player that is not integrated in the
unit, select "AUD" mode.
90
;,'1
DNX7120lDDX712/DDX7032