Kenwood DNX7120 Instruction Manual page 57

Setting Up the Hands Free Phone
The Hands Free system can be set as follows.
o
Display the Hands Free Setup screen
D
Setup each item
[] Moves to the "Hands Free Set Up
2"
screen.
rn
Sets an automatic response time after call
termination.
((2]
"8")
"Off": This function can not use.
"0-99": Sets to calling ring time (second).
[II
Sets a ringing tone output position.
((2]
"Front R")
"Front L": Outputs the tone from the front
left-hand side speaker.
"Front R": Outputs the tone from the front
right-hand side speaker.
"Front All": Outputs the tone from the both
front speakers.
[I]
Sets the beep of the incoming call.
((2]
"On")
"On": Beep is heard.
"Off": Beep is canceled.
[[] Sets the beep of the incoming SMS.
(!C
"On")
"On": Beep is heard.
"Off": Beep is canceled.
[§]
Returns to the "Hands Free Control" screen.
[l]
Returns to the "Hands Free Set Up 1" screen.
[]] Sets whether to use cell-phone phonebook,
outgoing calls list and incoming calls list.
((2]
"On")
"On": Yes.
"Off": No.
[]] Sets the SMS function.
((2]
"On")
"On": Use SMS function.
"Off": SMS not available.
[Q]
Registers the voice to select phone number
category with voice recognition.
See <Key Word Voice Registration> (page
59).
[TIl
Registers the phone number to Hands Free
Control screen preset button.
See <Phone Number Preset> (page 60).
[J1]
Returns to the Hands Free Control screen.
(§2
Either the time interval for automatic answer set on this
unit or the time interval set on the cell-phone, whichever
is shorter, takes effect.
Select the speaker which is further from the microphone
in order to prevent howling or echoes.
English 57