Kenwood DNX7120 Instruction Manual page 136

Creating and Editing Routes
Deleting All Saved Routes
From the Menu page, touch Tools>
My
Data>
Routes> . . > Delete All Saved Routes.
Stopping Your Route
From the Menu page, touch Stop. Then touch
Yes.
Adding a Detour to a Route
If you need to take a detour from your current
route, open the Menu page and touch Detour.
1/2 mile, 2 miles, or 5 miles-select the distance for
the detour. For example, if a road sign indicates that the
street is closed for the next 2 miles, touch 2 miles in the
list. The navigation system recalculates your route for the
next 2 miles.
Detour
by
Road(s) In Route-select roads on your
route to avoid. For example, if the highway ramp is
closed, select the ramp in the list of roads. The navigation
system recalculates your route to avoid that ramp.
Detour
by
Traffic Event on Route-if you are using
an FM Traffic Receiver or XM NavTraffic, you can detour
around traffic events.
Remove All Detours-touch to remove any detours
you have entered for the route.
Adding Avoidances
From the Menu page, touch Settings>
Navigation> . . > Avoidance Setup. Select
the road type to avoid. Touch" to view more
road types to avoid.
Creating Custom Avoids
You can enter specific areas and roads to avoid
on your routes. From the Avoidance Setup menu,
touch" two times and then touch Custom
Avoids.
D
Touch Add New Avoid Area or Add New
Avoid Road.
D
Touch the first corner and touch Next.
D
Touch the second corner and touch Next.
D
Touch Finish.
20 • DNX7120IDNX8120 GPS Navigation Instruction Manual