Kenwood DNX5120 Instruction Manual

Kenwood DNX5120 Instruction Manual

Kenwood gps navigation system monitor with dvd-receiver instruction manual
Hide thumbs Also See for DNX5120:
Table of Contents

Advertisement

GPS NAVIGATION SYSTEM
DNX5120
DNX512EX
MONITOR WITH DVD RECEIVER
DDX512
DDX5032

INSTRUCTION MANUAL

Take the time to read through this instruction manual.
Familiarity with installation and operation procedures will help you obtain the best
performance from your new GPS Navigation System/DVD Receiver.
For your records
Record the serial number, found on the back of the unit, in the spaces designated on the
warranty card, and in the space provided below. Refer to the model and serial numbers
whenever you call upon your Kenwood dealer for information or service on the product.
Model DNX5120/DNX512EX/DDX512/DDX5032 Serial number
US Residence Only
Register your Kenwood product at
www.Kenwoodusa.com
© B64-3971-00/00 (KW/K2W/RW)
Register Online

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood DNX5120

  • Page 1: Instruction Manual

    Record the serial number, found on the back of the unit, in the spaces designated on the warranty card, and in the space provided below. Refer to the model and serial numbers whenever you call upon your Kenwood dealer for information or service on the product. Model DNX5120/DNX512EX/DDX512/DDX5032 Serial number...
  • Page 2: Table Of Contents

    Notes Navigation Control Using the Navigation System Navigatoin Information Interrupt on the Screen of Other Sources (DNX5120/DNX512EX only) Control of Other Sources While Displaying the Navigation Screen Watching DVD/VCD Functions During the Playback Screen Functions When Displaying the Easy Control...
  • Page 3 Muting Audio Volume upon Reception of Phone Call Muting Audio Volume upon Reception of Phone Call Character Entry How to Use the Character Entry Screen Screen Control Screen Control Setup Menu Setup Menu Audio Setup Crossover Network Setup DVD Setup Language Setup Parental Level Setup System Setup...
  • Page 4: How To Read This Manual

    For this reason, they may be different from the actual displays or panels used, or some display patterns may be different. DNX5120/DNX512EX/DDX512/DDX5032 Seek Mode Sets a station selection. The mode is switched in following order each time you touch the button.
  • Page 5 English...
  • Page 6: Before Use

    • If you experience problems during installation, consult your Kenwood dealer. • When you purchase optional accessories, check with your Kenwood dealer to make sure that they work with your model and in your area. • The characters conforming to ISO 8859-1 character set can be displayed.
  • Page 7: Notes

    Notes Navigation units that can be connected to this unit (DDX512/DDX5032 only) • KNA-G510* • KNA-DV4100 • KNA-DV3100 • KNA-DV2100 * Update the navigation software to the latest version. For how to update the software, refer to the instruction manual of the navigation unit. iPod that can be connected to this unit You can control an iPod from this unit by connecting an iPod (commercial product) with Dock connector...
  • Page 8 • When the iPod is connected to this unit, "KENWOOD" or "✓" is displayed on the iPod to indicate that you cannot operate the iPod. • When the USB device is connected to this unit, it can be charged up provided that this unit is powered.
  • Page 9: Region Codes In The World

    Region codes in the world The DVD players are given a region code according to the country or area it is marketed, as shown in the following map. DVD disc marks Symbol Description Indicates a region number. The discs with this mark can be played with any DVD player.
  • Page 10: Basic Operations

    See <USB Device Control> (page 34). ¤ • Removing the USB device before entering the USB suspend mode may result in damaging the data in the USB device. DNX5120/DNX512EX/DDX512/DDX5032 Switches to the Navigation system Press the button to switch the display to the navigation system screen.
  • Page 11 Selecting a source Press it to display the source select screen. Touch the source button to select the source. Full Source Select screen Favorite Source Select screen Playing a disc When you load a disc into disc loading slot, the disc starts playing. If a menu appears, when playing a video disc, select the desired item.
  • Page 12 Connect an external player such as a digital audio player to AV IN jack. Use of the optional cable CA-C3AV is recommended for connecting an external player. DNX5120/DNX512EX/DDX512/DDX5032 Switches to the rear view Press it for more than 1 second to switch to rear view.
  • Page 13 • For the functions of Easy Control buttons, see <Control of Other Sources While Displaying the Navigation Screen> (page 15). Source Control screen Navigation information (DNX5120/DNX512EX only) Scrolls the list and makes a selection When the list screen of a source control screen is displayed, press it for more than 1 second to enter list control mode.
  • Page 14: Navigation Control

    (page 7) for connectable navigation units. DNX5120/DNX512EX/DDX512/DDX5032 Navigation Information Interrupt on the Screen of Other Sources (DNX5120/DNX512EX only) Interrupts other source screen and displays information such as guide point. While a control screen is displaying: Navigation information appears on the bottom of the screen.
  • Page 15: Control Of Other Sources While Displaying The Navigation Screen

    Control of Other Sources While Displaying the Navigation Screen Selected source can be controlled while displaying navigation screen. Display the easy control buttons When "DVD" is selected: 1 Displays the Screen Control screen. See <Screen Control> (page 43). 2 Turns the traffic information function On or Off.
  • Page 16: Watching Dvd/Vcd

    Title C h a p 1 Title Number Display 2 Chapter Number Display 3 Play Time Display DNX5120/DNX512EX/DDX512/DDX5032 4 Forward Chapter Search Area Selects the next chapter. 5 Backward Chapter Search Area Selects the previous chapter. 6 DVD Disc Menu Control Buttons Area Displays the Disc Menu Control buttons (page 18).
  • Page 17: Functions When Displaying The Easy Control Panel

    Functions When Displaying the Easy Control Panel Displays the basic operation buttons on the screen. While the source is playing, press the [FNC] button Mode:Full AV–OUT:AV–IN DVD VIDEO SCRN DVD VIDEO Title C h a p 1 Chapter Search (during DVD play) Searches for a chapter.
  • Page 18: Dvd Disc Menu

    Turns the PBC function of VCD On or Off. (only when VCD Ver 2.0 is in use) ; Appears when PBC is On. a VCD version indicator DNX5120/DNX512EX/DDX512/DDX5032 DVD Disc Menu Selects an option from the DVD Disc Menu. Display the Disc Menu Control screen Mode:Full AV–OUT:AV–IN...
  • Page 19 Highlight Control You can select a chapter and title for the DVD Menu screen. When you touch the screen, you can select the DVD menu. M e n u C t r l M e n u C t r l E n t e r E n t e r C a n c e l...
  • Page 20: Vcd Zoom Control

    1 Changes the zoom ratio at 2 levels (2 times or off ) each time you touch. 2 Scrolls the screen in the direction you touch. 3 Clears the Zoom Control button. DNX5120/DNX512EX/DDX512/DDX5032 AV–OUT:AV–IN P 0 0 : 0 5 E x i t E x i t...
  • Page 21: Music Disc & Audio File Listening

    Music Disc & Audio File Listening You can recall various control screens during CD/Audio file playback. • For the basic method of how to play a music disc/audio file, see <Basic Operations> (page 10). • See <List of playable discs> (page 7) for playable discs. •...
  • Page 22 Switches the number of lines displayed in the Information Display. v Function Indicator DNX5120/DNX512EX/DDX512/DDX5032 b MUSIC, MOVIE or PICTURE indicator n Appears when a disc is inserted. m Repeats to play the music or data of the present folder.
  • Page 23: Video File/Picture Watching

    Video File/Picture Watching You can recall various control screens during playback of video file (MPEG 1 and MPEG 2 file) and picture file (JPEG file). Function During Playback Screen Basic functions are available even when the playback screen is displayed. Display the playback screen [DVD] button on the "Source Select"...
  • Page 24: Functions When Displaying The Easy Control Panel

    • When the navigation screen is displayed, press the [NAV] button to switch to the source playback screen. • The Easy Control Panel is hidden when you touch a central part of the monitor. DNX5120/DNX512EX/DDX512/DDX5032 Functions While Displaying the Control Screen Switches to the source control screen to use various playback functions.
  • Page 25: Picture Control

    5 Video/Picture information display Selects Folder Name, File Name, Title, Artist Name, or Album Name. When is appeared, the text display is scrolled by pressing it. 6 Ejects a disc. 7 Fast Forwards or Fast Backwards. (Disabled when a JPEG is being played.) 8 Stops playing.
  • Page 26: Radio Listening

    [TUNER] button on the "Source Select" screen 1 Band display 2 Preset number 3 Frequency display DNX5120/DNX512EX/DDX512/DDX5032 4 Radio station information display. 5 Switches to the FM1/2/3 band. 6 Switches to the AM band. 7 Tunes in a station.
  • Page 27: Seek Mode

    o Memorized stations are displayed. Touch to tune in. ; Scrolls the list. a Switches the list display name to Station name or Program Service Name. Seek Mode Sets a station selection. The mode is switched in following order each time you touch the button.
  • Page 28: Auto Memory

    ⁄ • The operation ends automatically if you do not operate within 10 seconds. DNX5120/DNX512EX/DDX512/DDX5032 Manual Memory Stores the current receiving station in memory. Select a station you wish to store in...
  • Page 29: Radio Text

    Radio Text You can display the radio text. (Only when receiving the FM broadcast) Select a station Display the radio text 1 Selects the Program Service Name, Title & Artist name, Station Name, Radio Text Plus, or Radio Text for text display. When is appeared, the text display is scrolled by pressing it.
  • Page 30: Traffic Information

    • During reception of traffic information the adjusted volume is automatically remembered, and the next time it switches to traffic information it's automatically the remembered volume. DNX5120/DNX512EX/DDX512/DDX5032 Search for Program Type A program is tuned when you set its program type. (Only when receiving the FM broadcast)
  • Page 31: Ipod Control

    • If the played song is not a video content, "No iPod Video Signal" is displayed on the video screen. • While connecting an iPod, "KENWOOD" appears on the iPod and the iPod's control is disabled. Functions When Displaying the Easy...
  • Page 32: Functions While Displaying The Control Screen

    [FNC] button. Mode:Full iPod SCRN iPod [iPod] button on the "Source Select" screen DNX5120/DNX512EX/DDX512/DDX5032 1 Image picture 2 Total number of music in the iPod and the AV–OUT:AV–IN 3 Play Mode Display 4 Play Time Display 5 Music/Video Information Display P 0 0 : 0 0 : 0 5 6 Fast Forwards or Fast Backwards.
  • Page 33 o Categories and music are listed. Touch a category name to move its lower level. If music title is displayed, the music is played by touching it. When is appeared, the text display is scrolled by pressing it. When is appeared, all the music in its category is played by touching the button.
  • Page 34: Usb Device Control

    1 Selects a file. 2 Plays or pauses. ⁄ • The Easy Control Panel is hidden when you touch a central part of the monitor. DNX5120/DNX512EX/DDX512/DDX5032 Functions While displaying the Control Screen Switches to the source control screen to use various playback functions.
  • Page 35 1 Image picture Switches to the playback screen. If there is no playback screen, wallpaper is displalyed. 2 Track Number Display 3 Play Mode Display 4 Play Time Display 5 Music information display Selects the Folder Name, File Name, TItle, Artist Name, or Album Name.
  • Page 36: Folder Select

    Folder opens when touched, and the Audio file is played. 2 Scrolls the list. 3 Moves to the top hierarchy level. 4 Moves up a hierarchy level. 5 Moves to the top category. 6 Displays the currently playing file. DNX5120/DNX512EX/DDX512/DDX5032...
  • Page 37: Sirius/Xm Control (North American Sales Area Only)

    Sirius/XM Control (North American sales area only) Various control screens appear in the Satellite radio source mode. (with the optional accessory Satellite radio connected only. To connect the Sirius tuner, a conversion cable CA-SR20V (optional accessory) is necessary and to connect the XM tuner, an XM interface Box KCA-XM100V (optional accessory) is necessary.) •...
  • Page 38: Channel Search

    7 Switches the sequence of the list. Changes the display from Channel Name, Category Name, Song Title, Artist Name, to Composer Name. (Sirius only) DNX5120/DNX512EX/DDX512/DDX5032 Channel Memory Stores the current receiving channel in memory. Select a channel you wish to store in...
  • Page 39: Direct Channel Search

    Direct Channel Search Tuning in by entering the desired channel number. Start Direct Channel Search Enter the channel number 1 Enters the channel number. 2 Cancels the direct channel search. 3 Clears the channel number. Tune in the channel : Press for # seconds. English...
  • Page 40: Bluetooth Audio Control

    [Bluetooth] button on the "Source Select" screen 1 Plays. 2 Pauses. 3 Stops playing. 4 Selects a file. ⁄ • If the Bluetooth Audio player does not support AVRCP profile, buttons 1 to 4 are not displayed. Operate from the Audio player. DNX5120/DNX512EX/DDX512/DDX5032...
  • Page 41: Muting Audio Volume Upon Reception Of Phone Call

    Muting Audio Volume upon Reception of Phone call When the telephone is called, the system is paused automatically. Muting Audio Volume upon Reception of Phone Call When the telephone is called... The Phone Call ("CALL") screen appears, and system is paused. Phone Call ("CALL") screen When the call ends...
  • Page 42: Character Entry

    If you erase a character, locate the cursor on it and touch this button. 6 Clears the character. 7 Exits the Character Entry mode and returns to the previous screen. ⁄ • You can enter characters only after you have applied the parking brake. DNX5120/DNX512EX/DDX512/DDX5032...
  • Page 43: Screen Control

    The display doesn’t dim. "SYNC": Turning the Dimmer function On or Off when the vehicle light control switch is turned On or Off. "NAV-SYNC" (DNX5120/DNX512EX only): Turning the Dimmer function On 7 Returns to the previous screen. ⁄ • The Screen Control screen is displayed only when you have applied the parking brake.
  • Page 44: Hands Free Unit Control

    : There is unread short message. : There is no unread short message. DNX5120/DNX512EX/DDX512/DDX5032 2 Displays the called phone numbers. 3 Calls the displayed preset phone number. 4 Displays the SMS Select screen.
  • Page 45: When Received A Call

    ⁄ • While your car is moving, some functions are disabled for safety’s sake. The buttons associated with the disabled functions become ineffective if pressed. • When the Hands-Free Control screen appears, the name of the connected cell-phone is displayed for 5 seconds. •...
  • Page 46: Calling By Entering A Phone Number

    End the call The Hand Free screen reappears. ⁄ • You can input max 32 digits. DNX5120/DNX512EX/DDX512/DDX5032 Quick Dialing You can register up to 6 phone numbers for quick dialing. ⁄ • Phone numbers must be registered in advance.
  • Page 47: Controlling Tone-Based Services

    Controlling Tone-based Services Uses tone base service using DTMF (Dual Tone Multi Frequency). Display the DTMF input screen Display the Talking screen. See <Calling by Entering a Phone Number> (page 46). You can send tones during a call 1 Returns to the previous screen. Calling by Phonebook You can call a person using his/her phone number that you have registered in the...
  • Page 48 Displays the detail of the selected Phonebook data. e Returns to the Initial Input screen. Select the phone number to call DNX5120/DNX512EX/DDX512/DDX5032 r Calls the selected phone number. t Creates an SMS for the displayed phone number. See <SMS (Short Message Service)> (page 55).
  • Page 49: Making A Call Using Outgoing/Incoming Call Records

    Making a Call Using Outgoing/Incoming Call Records Calls by selecting a phone number from the outgoing or incoming calls list. Display the Outgoing Calls or Incoming Calls screen : Outgoing Calls : Incoming Calls The Outgoing Calls or Incoming Calls list screen appears.
  • Page 50: Calling By Voice Recognition

    If the voice recognition is succeeded and there is only one phone number found: Make a call. 3 Displays the phonebook list. DNX5120/DNX512EX/DDX512/DDX5032 If you hear another Beep sound: Speak the key word within 2 seconds after the Beep, or touch the [Phonebook List] button to select the phone number.
  • Page 51: Setting Up The Hands-Free Phone

    Setting Up the Hands-Free Phone The Hands-Free system can be set as follows. Display the Hands Free Setup screen Setup each item 1 Moves to the "Hands Free Setup 2" screen. 2 Sets an automatic response time after call termination. ( "8") "Off": This function can not use.
  • Page 52: Voice Recognition

    2 Registers the voice. 3 Cancels voice registration. Utter within 2 seconds after the Beep. Utter the voice to register (2nd try) DNX5120/DNX512EX/DDX512/DDX5032 End voice registration ⁄ • A message is displayed if the voice is not recognized. Read the message for the further operation.
  • Page 53: Key Word Voice Recognition

    Key Word Voice Recognition Registers the voice to select the Phone number category by Voice Recognition. Display the Key Word List screen Display the "Hands Free" screen and touch [Setup]. See <Control Screen Function> (page 44). Select the Phone number category to register 1 Selects the Phone number category.
  • Page 54: Phone Number Preset

    7 Registers by entering phone numbers. 8 Registers voice for voice recognition to preset number. 9 Registers the currently displayed phone number. DNX5120/DNX512EX/DDX512/DDX5032 p Deletes the currently displayed phone number. q Returns to the previous screen. Search phone number to register with...
  • Page 55: Sms (Short Message Service)

    SMS (Short Message Service) Uses SMS function. Display the SMS Select screen Select a function 1 Displays received message list. 2 Displays sent message list. 3 Displays the Message screen. If there is an unfinished message, the button will be active.
  • Page 56: Setup Menu

    • [Audio Setup] and [AV Interface] options can be locked. The key mark ( ) is displayed in reverse video for the locked option. See <Setup Memory> (page 80). DNX5120/DNX512EX/DNX512EX/DDX512/DDX5032 Audio Setup You can setup a speaker network, etc. Display the Audio Setup screen Touch Menu"...
  • Page 57: Crossover Network Setup

    Crossover Network Setup You can set a crossover frequency of speakers. Select the speaker to set the crossover 1 Sets the High Pass Filter of the front speaker. 2 Sets the High Pass Filter of the rear speaker. 3 Sets the Low Pass Filter of the sub woofer. 4 Switches to the crossover setup screen.
  • Page 58: Language Setup

    (See <Parental Level Setup>, page 59) p Keep "Auto" to use.* ⁄ • *1 Disabled when a DVD is being played. DNX5120/DNX512EX/DDX512/DDX5032 Language Setup Selects a language you use for the speech and menus. Select the language item to set See <DVD Setup>...
  • Page 59: Parental Level Setup

    Parental Level Setup Sets a parental level. Display the Parental Level code number screen See <DVD Setup> (page 57) and touch [Parental Level]. Enter the code number 1 Enters a code number. 2 Cancels the current setup and returns to the "DVD Setup 2"...
  • Page 60: System Setup

    Also, you may not play some music CDs in the "2" position. • Your setup is disabled when the disc is being played. DNX5120/DNX512EX/DDX512/DDX5032 in the "Setup 6 Returns to the "System Setup 1" screen. 7 Moves to the "System Setup 3" screen.
  • Page 61: Panel Color Coordinate

    t Selects a picture display time. ( The Display of a JPEG picture is changed. ("Short", "Middle", "Long") Panel Color Coordinate Sets the screen and button illumination color. Display the Panel Color Coordinate screen See <System Setup> (page 60). Select a color 1 Sets to the touched color.
  • Page 62: Av Interface Setup

    AV INPUT port, this image is displayed. 4 Selects a navigation system connection. ( "RGB") (DDX512/DDX5032 only) "RGB": Allows the Kenwood's Navigation System to connect via the AV INPUT port. "AV-IN": Allows a third-party navigation system to connect via the AV INPUT port.
  • Page 63 ( "ON") When turned "ON", the volume level drops for voice guidance. t Sets the guide display method of the Navigation system. ( "ON") (DNX5120/ DNX512EX only) "ON" : Pops up the guide. "OFF" : Guide is not displayed. English...
  • Page 64: User Interface

    4 Sets whether to display the target when touching the panel. 5 Returns to the "User Interface 1" screen. 6 Moves to the "User Interface 3" screen. DNX5120/DNX512EX/DDX512/DDX5032 7 Sets an on-screen display of the iPod Playback screen. ( "Auto": "Manual": Information is displayed when you...
  • Page 65: Direct Source Button Setup

    r Returns to the "User Interface 3" screen. t Sets whether to display the name of the , and buttons on the right side of the menu screen. y Registers the source displayed in the favorite source screen. See <Direct Source ButtonSetup> (page 65).
  • Page 66: Entering Background

    • See <About Picture files> (page 8) for readable image specifications. • This operation is not possible when USB is selected as the source. DNX5120/DNX512EX/DDX512/DDX5032 Background Delete Deletes the background image. Delete the image you have loaded in the "Setup Confirm 1 Returns to the Pictrue Select screen.
  • Page 67: Background Select

    Background Select Selects a image for background. Select Background Change screen Select a image for background 1 Returns to the initial background. 2 Returns to the original screen. Set the image as the background Touch Panel Adjustment You can adjust the touch panel operations. Display the Touch panel Adjustment screen Touch...
  • Page 68: Clock Setup

    Setup examples: 3:00 – 3:29 \ 3:00 3:30 – 3:59 \ 4:00 5 Sets the clock time in synchronization with the time data sent from the navigation system or the RDS station. (DNX5120/ DNX512EX; DDX512/DDX5032 with KNA- G510) Sets the clock time in synchronization with the time data sent from the RDS station.
  • Page 69 8 Selects a screen mode of the DVD playback screen. You can select any of the following screen mode. "Full", "Just", "Zoom", "Normal" 9 Selects a screen mode of the iPod VIDEO playback screen. You can select any of the following screen mode.
  • Page 70: Security Code Setup

    • If you have already completed the code registration, is displayed. Enter a security Code Input four-digit number. DNX5120/DNX512EX/DDX512/DDX5032 Register your security code Reenter the security code Reenter the same security code as that you have entered in Step 3 for confirmation.
  • Page 71: Deactivating Security Code

    If you have pressed the Reset button or if you have disconnected the Receiver from battery... Enter the correct security code You must enter the same security code as that you have entered in Step 3. Enter the security code Now, you can use your Receiver.
  • Page 72: Ipod Setup

    1 Sets the Audio book playback speed. 2 Sets Wide Screen on or off. ⁄ • "Wide Screen" cannot be set while the iPod is connected. DNX5120/DNX512EX/DDX512/DDX5032 Sirius Setup You can set up the Parental lock for Sirius. Display the Sirius Setup screen in the "Setup...
  • Page 73: Sirius Parental Code Setup

    Sirius Parental Code Setup Sets a Sirius Parental code. Display the Parental Code screen ⁄ • If you have already completed the code registration, is displayed. • If you to clear the code which has already registered, press Enter the current code number 1 Enters a code number.
  • Page 74: Sirius Parental Lock Setup

    Sirius Parental Code. In this case, you are requested to input the code once more. DNX5120/DNX512EX/DDX512/DDX5032 Sirius Parental Lock Channel Select Selects the channel to enable Sirius Parental lock function.
  • Page 75: Bluetooth Setup

    Set the parental lock for each channel 5 Lists the channel. The channel name scrolls by pressing 6 Scrolls the channel list. 7 Sets the Parental lock function on or off for each channel. You need to input the Parental code to switch the Parental lock function on or off.
  • Page 76: Registering Bluetooth Unit

    7 Scrolls the name of the Bluetooth unit. 8 Cancels searching of Bluetooth unit. 9 Starts search. p Scrolls. q Returns to the previous screen. DNX5120/DNX512EX/DDX512/DDX5032 Enter PIN code Enter the PIN code specified for the Bluetooth unit to register. w Enters a code number.
  • Page 77: Registering Bluetooth Unit Pin Code

    Registering Bluetooth Unit PIN Code Sets the PIN code of the Bluetooth unit to enter when registering (pairing) from the cell-phone or audio player side. Display the Receiver PIN Code screen Enter PIN code 1 Enters a code number. 2 Cancels registration of PIN code. 3 Enters PIN code.
  • Page 78: Bluetooth Unit Connection

    5 Connects/disconnects Audio player to use for Bluetooth Audio. 6 Deletes registration (pairing). 7 Returns to the previous screen. DNX5120/DNX512EX/DDX512/DDX5032 Deleting Bluetooth Unit Deletes the registered Bluetooth unit. Display the Connect Device List screen Select a Bluetooth unit to delete...
  • Page 79: Software Information

    Software Information Checks the software version of this unit. Display the Software Information screen Touch Menu" screen (page 56). 1 Displays the software version. in the "Setup English...
  • Page 80: Setup Memory

    4 Memorizes the current Audio Set Up and AV Interface settings. 5 Clears the currently memorized settings. 6 Returns to "Setup Memory" screen. DNX5120/DNX512EX/DDX512/DDX5032 Memorize or recall the settings When memorizing the Audio Setup and AV Interface settings: If settings have already been memorized, a confirmation message appears.
  • Page 81 English...
  • Page 82: Audio Control

    Touch any source button on the "Source Select" screen. Display the Audio Control menu Select the Audio Control item 1 Switches to the selected Audio Control screen. DNX5120/DNX512EX/DNX512EX/DDX512/DDX5032 Audio Control You can adjust the front/rear and right/left audio balance. Display Audio Control screen Touch Control Menu"...
  • Page 83: Equalizer Control

    9 Adjusts the volume of the present source based on the difference level of original volume. ⁄ • If you have increased the volume first, then reduced the volume using the "Vol. Offset", the sound generated if you suddenly switch to another source may be extremely loud.
  • Page 84: Tone Setup

    If turned "ON", it extends the bass center frequency to the low register by approximately 20%. 9 Returns to the "Equalizer" screen. DNX5120/DNX512EX/DDX512/DDX5032 Zone Control You can set the front and rear audio source. Display Zone Control Touch Control Menu" screen (page 82).
  • Page 85 set to "Front", "DVD" or "USB", the same source screen or control screen is displayed in the rear monitor. See <AV Interface Setup> (page 62). English...
  • Page 86: Remote Controller

    In such instances, replace the both batteries with new ones. DNX5120/DNX512EX/DNX512EX/DDX512/DDX5032 Remote Controller mode switch The functions operated from the remote controller differ depending on the position of the mode switch.
  • Page 87: Common Operations (Aud Mode)

    Common operations (AUD mode) Source switching Switches to the source to be played. DISP V.SEL ZOOM MENU POSITION • • ENTER • Volume control Adjusts the volume. VIEW MAP DIR ANGLE FM + ZOOM AM− 2 ZONE Volume attenuator Press the key once to lower the volume. Press again to restore the previous volume.
  • Page 88: Dvd/Vcd/Cd/Audio Files (Dvd Mode)

    Title number Chapter number Play time Item number* Cancel * You may not be able to use this function with some discs or scenes. DNX5120/DNX512EX/DNX512EX/DDX512/DDX5032 Track number Play time Cancel Audio files Folder number File number Cancel VCD 1.X, VCD 2.X (PBC OFF)
  • Page 89: Radio (Aud Mode)

    DVD Menu Displays the DVD menu. Turns the playback control on or off while playing VCD. • ENTER • • NAVI AUDIO RETURN MODE/TOP MENU FNC/MENU/PBC ROUTEM VOICE CANCEL AV OUT OPEN SUBTITLE VIEW MAP DIR ANGLE FM + SUBTITLE Switches the subtitle language.
  • Page 90: Navi (Navi Mode)

    SUBTITLE VIEW MAP DIR ANGLE POSITION Displays the current position. DISP V.SEL ZOOM MENU POSITION • • ENTER • DNX5120/DNX512EX/DDX512/DDX5032 ROUTEM Displays Route Option menu. • ENTER • • NAVI AUDIO RETURN MODE/TOP MENU FNC/MENU/PBC ROUTEM VOICE CANCEL AV OUT...
  • Page 91: Dvd Language Codes

    DVD Language Codes Code Language Afar Abkhazian Afrikaans Amharic Arabic Assamese Aymara Azerbaijani Bashkir Byelorussian Bulgarian Bihari Bislama Bengali, Bangla Tibetan Breton Catalan Corsican Czech Welsh Danish German Bhutani Greek English Esperanto Spanish Estonian Basque Persian Finnish Fiji Faroese French Frisian Irish Scots Gaelic...
  • Page 92: Help? Troubleshooting

    <AV lnterface Setup> (page 62) "AV-OUT Graphic Output" of <AV Interface Setup> is set to "Black". DNX5120/DNX512EX/DNX512EX/DDX512/DDX5032 What might seem to be a malfunction in your unit may just be the result of slight misoperation or miswiring. Before calling service, first check the following table for possible problems.
  • Page 93 English...
  • Page 94: Help? Error

    Mecha Error : The disc player is malfunctioning. ➡ Eject the disc and try inserting it again. Contact the Kenwood dealer if this indicator continues blinking or the disc cannot be ejected. Disc Error : An unplayable disc is inserted.
  • Page 95 Check Sirius: The unit cannot recognize the connected Sirius Tuner Box. ➡ Check the connection of the Sirius Tuner Box. Antenna Error: Something is wrong with the anntena. ➡ Check the connection of the antenna. Acquring Signal: The unit cannot receive any signal. ➡...
  • Page 96: Specifications

    Disc Format : DVD-Video/ VIDEO-CD/ CD-DA Sampling Frequency : 44.1/ 48/ 96 kHz Quantifying Bit Number : 16/ 20/ 24 bit DNX5120/DNX512EX/DNX512EX/DDX512/DDX5032 USB interface section USB Standard : USB 1.1/ 2.0 File Sytem : FAT 16/ 32 Maximum Power Supply Current...
  • Page 97 Specifications subject to change without notice. Although the effective pixels for the liquid crystal panel is given as 99.99% or more, 0.01% of pixels may not light or may light incorrectly. Navigation section (DNX5120/DNX512EX only) Receiver : High-sensitivity GPS receiver Reception Frequency : 1575.42 MHz (C/A code)
  • Page 98 The "AAC" logo is trademark of Dolby Laboratories. Apple, the Apple logo, and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. is a trademark of DVD Format/Logo Licensing Corporation registered in the U.S., Japan and other countries. This product incorporates copyright protection technology that is protected by U.S.
  • Page 99 Kenwood Corporation 2967-3, ISHIKAWA-MACHI, HACHIOJI-SHI TOKYO, JAPAN KENWOOD CORP. CERTIFIES THIS EQUIPMENT CONFORMS TO DHHS REGULATIONS N0.21 CFR 1040. 10, CHAPTER 1, SUBCHAPTER J. Location : Bottom Panel FCC WARNING This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual.

This manual is also suitable for:

Ddx5032Dnx512exDdx5032mDdx-512

Table of Contents

Save PDF