Audio Control; Audio Control Menu - Kenwood DNX6140 Instruction Manual

Audio Control
Audio Control Menu Audio Control
Displays the Audio Control menu to set the sound
effect function of this unit.
You can adjust the front/rear and right/left audio
balance.
o
Display the control screen of any source
o
Display Audio Control screen
D
Display the Audio Control menu
OJ
Moves to the "Audio Control 2" screen.
[I]
Adjust the front/back and left/right volume
around the touched area.
[1]
Adjusts the right and left volume balance.
IIJ
Adjusts the front and rear volume balance.
[i]
Turns the Loudness control function On or
Off.
If turned "ON", high and low tones are
automatically enhanced during low volume.
Settable Only when zone function is set to
Off. See <Zone Control> (page 88).
[§]
Displays the present source information.
The stream (Dolby Digital, dts, Linear PCM,
MPEG, MP3, WMA or AAC) is displayed.
Touch "',,,,,,,.,."',,,, ' in the "Audio
Control Menu" screen (page 86).
D
Set the each item
' 1 m
Touch any source button on the "Source Select"
screen.
ITJ
Switches to the selected Audio Control
screen.
[I'
D
Select the Audio Control item
I]]
Returns to the "Audio Cantrall" screen.
[ill
Adjusts the subwoofer volume.
86.
DNX6140/DNX6000EX/DNXS140/DDXS14/DDXS034/DDXS034BT