The Pc2-Camlink; Components & Part Numbers - Dalsa PC2-CamLink User Manual

The PC2-CamLink

The PC2-CamLink is a half slot frame grabber that grabs images from a single base digital Camera
Link™ camera to host memory for processing. The board was designed for cost-effective
performance. Both linescan and area scan cameras are supported. Up to two channels are supported.
Note that RGB is not supported.
Components & Part Numbers
The following table lists the components and part numbers for the PC2-CamLink:
Item
Board
PC2-CamLink
Cables & Accessories
Camera Link™ Video Input Cable (optional product):
1 meter
2 meter
Optional Cable
Floppy power connector* (connects to J14)
Parallel I/O connector to female D-sub 25 bracket assembly (connects to J8)
Documentation
PC2-CamLink User's manual
IFC-SDK Software manual
Camera Configurator® User's manual
*The floppy power connector can be ordered by contacting DALSA. See
Information
" (on page 121)
PC2-CamLink User's Manual
for further information.
Part Number
OC-PC20-C0000
OC-COMC-CLNK0
OC-COMC-CLNK6
OC-COMC-POW03
4816
OC-PC2M-CUM00
403-00004-00
405-00006-00
DALSA Contact
"
Part I: PC2-CamLink Board • 5