Pc-Camlink Ifc Parameters Comparison; Overview - Dalsa PC2-CamLink User Manual

Project location

PC-CamLink IFC Parameters Comparison

Overview

The following tables compare IFC parameters between PC-CamLink and PC2-CamLink . They are
intended to help someone familiar with PC-CamLink to create config files for PC2-CamLink.
Parameters on the same line control equivalent functionality on their respective board. For a complete
description of each parameter, refer to the IFC-SDK Software Manual.
Camera Timing Inputs
PC-CamLink
Param
MAIN GROUP
P_LEN_POLARITY
P_FEN_ENABLE
P_FEN_POLARITY
LNK_DVAL_ENABLE
LNK_DVAL_POLARITY
PC2-CamLink User's Manual
Installation Directory\examples\PC2-CamLink\SeqSnap
Values
IFC_FALLING_EDGE
FC_RISING EDGE
IFC_DISABLE
IFC_ENABLE
IFC_FALLING_EDGE
IFC_RISING_EDGE
IFC_DISABLE
IFC_ENABLE
IFC_ACTIVE_LOW
PC2-CamLink
Param
P_LEN_POLARITY
P_FEN_ENABLE
P_FEN_POLARITY
CL2_DVAL_ENABLE
Always active high
Values
IFC_RISING_EDGE
IFC_DISABLE
IFC_ENABLE
IFC_RISING_EDGE
IFC_DISABLE
IFC_ENABLE
Part III: IFC • 105