Upgrading Sapera Or Any Board Driver; Board Driver Upgrade Only - Dalsa PC2-CamLink User Manual

•
When using Windows Vista or Windows 7, a message asking to install the DALSA device
software is displayed. Click Install.

Upgrading Sapera or any Board Driver

When installing a new version of Sapera or a DALSA acquisition board driver in a computer with a
previous installation, the current version must be un-installed first. Upgrade scenarios are described
below.

Board Driver Upgrade Only

Minor upgrades to acquisition board drivers are typically distributed as ZIP files available in the
DALSA web site http://www.dalsa.com/. Board driver revisions are also available on the next release
of the Sapera CD-ROM.
Often minor board driver upgrades do not require a new revision of Sapera. To confirm that the
current Sapera version will work with the new board driver:
•
Check the new board driver ReadMe file before installing, for information on the minimum
Sapera version required.
•
If the ReadMe file does not specify the Sapera version, contact DALSA Technical Support (see
"Technical Support" on page
PC2-CamLink User's Manual
122).
Part I: PC2-CamLink Board • 9