Ifc Software Examples; Ifc Examples For Pc2-Camlink - Dalsa PC2-CamLink User Manual

IFC Software Examples

IFC Examples for PC2-CamLink

Imaging Studio comes supplied with the following example programs for PC2-CamLink. Full source
code is included. You need Microsoft Visual C++ 6.0 or later to recompile the examples.
Two examples are included with PC2-CamLink. If IFC is installed on your system, go to Windows
Desktop and select the IFC folder or from the Windows Desktop: Start•Program•IFC Version
5.8•PC2-CamLink Examples.
The table below lists the PC2-CamLink examples:
Interrupt
Sequential Snap
Interrupt
Title
Description
Features
PC2-CamLink User's Manual
PC2-CamLink Examples
Demonstrates how to use interrupts available on PC2-CamLink.
Snaps a small number of images into host memory and replays them.
Interrupt
Shows how to register to interrupts available on PC2-CamLink.
Camera trigger setup can be changed from within this application.
-Uses CL2TEST.TXT for configuration
-Supports all acquisition interrupts
-Supports error interrupts
-External trigger configuration dialog
-SW trigger generation
Part III: IFC • 103