Ifc Software Installation; Ifc-Sdk - Dalsa PC2-CamLink User Manual

IFC Software Installation

IFC-SDK™

The IFC (Imaging Foundation Classes) library offers a C++ Application Program Interface (API)
intended for use with DALSA's PC2-CamLink board.
IFC is packaged within the "Imaging Studio CD-ROM".
See the IFC-SDK™ Software Manual for information concerning IFC.
Information in this manual matches IFC 5.8.
Note that PC2-CamLink is supplied with either Imaging Studio (IFC) or Sapera LT. Follow the
installation instructions that correspond to the software supplied with your board. It is not possible to
install both the Sapera LT and IFC PC2-CamLink driver on the same machine.
•
Make certain that all applications are closed before installation.
•
Insert the 'Imaging Studio' CD-ROM.
•
Select on Next after auto-start initiates and the 'Welcome' window appears.
•
Read the 'Information' window and select Next if you are not required to make adjustments to
your system. If adjustments are necessary, select Cancel, then make adjustments and re-install
'Imaging Studio' CD-ROM.
•
Select Yes after reading the 'Software License Agreement'.
•
Enter your name and company in the 'User Information' window and select Next.
•
Select Next in the 'Choose Destination Location' window if you want the software to install in the
default folder. Select Browse to choose another folder if desired.
•
If Browse is selected, select OK in the 'Choose Folder' window after path, directory, and
driver selections are made.
•
The 'Setup' window opens and asks if it can create the destination folder displayed. Select
Yes.
•
The 'Choose Destination Location' window reappears. Select Next.
•
The 'Setup Type' window is displayed. DALSA recommends selecting typical installation. Select
Next.
PC2-CamLink User's Manual
Part I: PC2-CamLink Board • 15