Upgrading Onboard Firmware
The Firmware Update program is used to upgrade onboard firmware, automatically opening on the
first reboot after installation. It can be launched manually if upgrading a board not present in the
system when the PC2-CamLink driver software was first installed.
IFC
Firmware Update displays a list of all products it supports, as shown in the following screenshot. To
update all supported products, click Yes and all PC2-CamLinks currently installed within the computer
will be updated with the latest firmware available within the installation CDROM.
A progress window is then displayed showing the upgrade process. Each board present within the
system will be listed. The board upgrade is performed in two steps:
•
The board is first analyzed to verify if its firmware is up-to-date.
•
If not, firmware is updated.
The two progress bars shown below allow you to follow the process.
20 • Part I: PC2-CamLink Board
Location of Board Update tool under Sapera:
Start•Programs•DALSA•PC2-CamLink•PC2-CamLink Update Tool
Location of Board Update tool under IFC:
Start•Programs•IFC 5.8.0.0•Tools•CorBoardUpdate for PC2-CamLink
PC2-CamLink User's Manual