Introduction; Overview Of The Manual - Dalsa PC2-CamLink User Manual

Introduction

Overview of the Manual

•
Part I: PC2-CamLink Board
•
The PC2-CamLink
Description of the PC2-CamLink board and its software as well as PC2-CamLink
package contents list.
Installing the PC2-CamLink
Hardware installation instructions as well as information concerning jumper
configuration and connecting cameras and devices.
Sapera LT Software Installation
Illustrates how to install Sapera LT and the PC2-CamLink device driver as well as
information concerning COM Port assignment and how to configure Sapera LT.
IFC Software Installation
Illustrates how to install IFC as well as information concerning upgrading onboard
firmware, configuring the serial port, and starting Camera Configurator.
Theory of Operation
Detailing PC2-CamLink features.
Technical Reference
PC2-CamLink specifications. Includes connector and pinout diagrams.
Camera Link™ Interface
Information concerning the Camera Link™ specification.
•
Part II: Sapera LT
•
Sapera Server and Parameters
Lists the Sapera server available and describes the Sapera parameters and values
supported by PC2-CamLink.
Sapera Software Examples
Describes in detail the Sapera Grab Demo.
•
Part III: IFC
•
IFC Software Examples
Two board specific examples of IFC software features using the PC2-CamLink.
PC-CamLink IFC Parameters Comparison
Lists PC-CamLink parameters compared with their corresponding PC2-CamLink
parameters.
•
Part IV: Troubleshooting and Support
•
Troubleshooting
Offers suggestions for resolving installation or usage problems.
PC2-CamLink User's Manual
Introduction • 1