Midi Information - Leslie 2101 Owner's Manual

MIDI Information

[Channel Voice Message]
Control Change
The value set by the Control Change is not reset even when
Program Change messages etc. are received.
Modulation(Leslie Speed)
Status 2nd Byte 3rd Byte
Bn 01 vv
n=MIDI Channel Number:
vv=Modulation Depth:
Data Entry
Status 2nd Byte 3rd Byte
Bn 06 mm
Bn 26 ll
n=MIDI Channel Number:
mm,ll=Value for the Parameter designated by NRPN.
Expression(Leslie Speed)
Status 2nd Byte 3rd Byte
Bn 0B vv
n=MIDI Channel Number:
vv=Expression:
Korg Rotary Fast Code
Status 2nd Byte 3rd Byte
Bn 52 vv
n=MIDI Channel Number:
vv=Control Value:
Korg Rotary Brake Code
Status 2nd Byte 3rd Byte
Bn 53 vv
n=MIDI Channel Number:
vv=Control Value:
Hold 1(Leslie Slow/Fast initial Code)
Status 2nd Byte 3rd Byte
Bn 40 vv
n=MIDI Channel Number:
vv=Control Value:
NRPN MSB/LSB
Status 2nd Byte 3rd Byte
Bn 63 mm
Bn 62 ll
n=MIDI Channel Number:
mm=Upper Byte of the Parameter Number designated by NRPN[MSB].
ll=Lower Byte of same[MSB].
NRPN- "Non Registered Parameter Number"
The expansive range named NRPN is provided in the Control Change,
which function is specific on each equipment and not defined in the
MIDI Standard.
When you use it, designate the parameter to control, by gibing NRPN MSB
and NRPN LSB (cc#98 and 99), and the set the value of the designated
parameter by the Data Entry MSB(cc#6).
Once the NRPN parameter is designated, all the data entry received into
the same channel after that is regarded as the change of the value of the
parameter. To avoid any mis-operation, we suggest you to set RPN Null
(RPN = 7F 7F), after setting the necessary parameter value.
0 - F(Ch.1 - 16)
00 - 7F
(MSB)
(LSB)
0 - F(Ch.1 - 16)
0 - F(Ch.1 - 16)
00 - 7F(0 - 127)
Default Value = 7F(127)
0 - F(Ch.1 - 16)
00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
0 - F(Ch.1 - 16)
00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
0 - F(Ch.1 - 16)
Leslie Slow/Fast Control Type=Mormentary:
00 - 7F(0 - 127) 0-63 = Off, 64-127 = On
Leslie Slow/Fast Control Type=Altarnate:
00 - 7F(0 - 127) 64-127 = Latch
(MSB)
(LSB)
0 - F(Ch.1 - 16)
Program Change
Status 2nd Byte
Cn pp
n=MIDI Channel Number:
pp=Program Number 0:preset1 1:preset2
Program Channel: Change Preset.
System Exclusive Message
Memory Dump
F0
System Exclusive
55 SUZUKI ID
10
Device ID
10 Model ID MSB
12 Model ID LSB
11
Command: Data Packet
[TYPE] Data Type
00h= Memory Dump
[PNH] Packet Number MSB
[PNL] Packet Number LSB
[DATA]
128 Bytes Data
256 Bytes nibblized ASCII
ex: 7Eh = 37h, 45h
[CHD] Check Digit
Lower 7 bits of XOR [DATA]
F7 End of Exclusive
Roland Leslie Slow Fast
F0 System Exclusive
41 Roland ID
10 Device ID
00
Model ID MSB
08 Model ID LSB
12 Command ID
02 address1
00 address2
10
address3
3D address4
[DATA] 00:Slow 01:Fast
[SUM]
no check
F7
End of Exclusive
29
0 - F(Ch.1 - 16)