Midi Dump Out - Leslie 2101 Owner's Manual

22
Ë MIDI Dump Out
This Advanced Feature allows you to send MIDI Data out via a Data Dump.
NOTE: The feature is helpful if you want to dump Preset Data out to a MIDI data recorder for later use.
TRY THIS:
1.
2.
3.
4.
5.
Ë MIDI Dump IN
No special setup is required to send a MIDI Data Dump from another MIDI device to the Leslie.
Simply connect the other MIDI device to the Leslie and transmit the data.
Prepare your MIDI Data recorder to Receive a MIDI Dump.
Touch and Hold the FUNCTION SELECT switch for approximately 1 second. Both
LEDs will light.
Select Dump Out using the Function Selector.
Slow Speed
Ho rn
Cross Over Freq./ Cabi. Resonance
Start the MIDI Data recorder.
Turn the VALUE Rotary Knob until the display starts flashing. The Data Transfer will
then commence.
DP
When the display stops flashing, the Data Dump is complete.
Touch & Hold Touch & Hold
[ MIDI ]
LOW LOW
HORN HORN
ROTOR ROTOR
ROTOR ROTOR
FUNCTION FUNCTION
SELECT SELECT
[Control Ch]
Fast Speed
[Prog. Ch]
Rise Time [Mod Rx]
Fall Time
[Exp Rx]
[S/F Type]
Brake Time
Rotor Direction /Mic Angle
[S/F Cont.Code]
Character /Mic Distance [Dump Out]
[P.F.SW Type]
VALUE
DOWN UP