Ë Connecting two Horn-Units to two Stationary-Units
Leslie 11-pin "Y" Cable (optional)
Use the above hookup when connecting multiple Leslie 21 Systems. By connecting the two Horn-Units via MIDI, the entire system can be
controlled from one master unit. Be sure to set the ROT BASS LEVEL and HORN LEVEL trim pots as shown using a small screwdriver.
NOTE: It is recommended that you set the Volume Controls as shown when first making the connections, then adjust them later to your preference.
ROT
BASS
HORN
LEVEL
LEVEL
ROT
BASS
HORN
LEVEL
LEVEL