Brake Time; Rotor Direction - Leslie 2101 Owner's Manual

Ë Brake Time
This Advanced Feature allows you to select the time required for the rotors to come to a complete stop
from Fast mode. You can select from "0.2" seconds through "12" seconds.
TRY THIS:
1.
2.
3.
Ë Rotor Direction
This Advanced Feature allows you to select the direction in which the Horn Rotor will turn. You can
select either "r" (right, or clockwise) or "L" (left or counter-clockwise. The default setting is "r."
TRY THIS:
1.
2.
4.
The above data can be stored to a Preset. Please see page 24 for information on how to save Presets.
Touch the FUNCTION SELECT switch to select either
HORN or LOW ROTOR. The LED (red for Horn,
green for Low) will light.
Select Brake Time using the Function Selector.
Slow Speed
Cross Over Freq./ Cabi. Resonance
Use the VALUE Rotary Knob to select the value you want.
!2
Touch the FUNCTION SELECT switch to select
HORN ROTOR. The red LED will light.
Select Rotor Direction / Mic Angle using the Function
Selector.
Slow Speed
Cross Over Freq./ Cabi. Resonance
Use the VALUE Rotary Knob to select the value you want.
[Control Ch]
Fast Speed [Prog. Ch]
[Mod Rx]
Rise Time
Fall Time
[Exp Rx]
[S/F Type]

Brake Time

Rotor Direction /Mic Angle [S/F Cont.Code]
Ho rn Character /Mic Distance [Dump Out]
[P.F.SW Type]
VALUE
DOWN UP
[Control Ch]
Fast Speed
[Prog. Ch]
Rise Time [Mod Rx]
Fall Time
[Exp Rx]
Brake Time [S/F Type]
Rotor Direction /Mic Angle [S/F Cont.Code]
Ho rn Character /Mic Distance [Dump Out]
[P.F.SW Type]
VALUE
DOWN UP
R
15
Touch & Hold Touch & Hold
[ MIDI ]
HORN HORN LOW LOW
ROTOR ROTOR ROTOR ROTOR
FUNCTION FUNCTION
SELECT SELECT
MIDI Touch & Hold Touch & Hold
[ ]
LOW LOW
HORN HORN
ROTOR ROTOR
ROTOR ROTOR
FUNCTION FUNCTION
SELECT SELECT