Rise Time; Fall Time - Leslie 2101 Owner's Manual

14
Ë Rise Time
This Advanced Feature allows you to select the time required for the Rotors to go from Slow to Fast.
You can select from "0.2" seconds through "12" seconds.
TRY THIS:
1.
2.
3.
Ë Fall Time
This Advanced Feature allows you select the time required for the Rotors to go from Fast to Slow. You
can select from "0.2" seconds through "12" seconds. The default setting is "1.0" seconds for the Horn
Rotor and "8.0" seconds for the Low Rotor.
TRY THIS:
1.
2.
4.
The above data can be stored to a Preset. Please see page 24 for information on how to save Presets.
Touch the FUNCTION SELECT switch to select either
HORN or LOW ROTOR. The LED (red for Horn,
green for Low) will light.
Select Rise Time using the Function Selector.
Slow Speed
Cross Over Freq./ Cabi. Resonance
Use the VALUE Rotary Knob to select the value you want.
*6
Touch the FUNCTION SELECT switch to select either
HORN or LOW ROTOR. The LED (red for Horn,
green for Low) will light.
Select Fall Time using the Function Selector.
Slow Speed
Cross Over Freq./ Cabi. Resonance
Use the VALUE Rotary Knob to select the value you want.
!0
[Control Ch]
Fast Speed [Prog. Ch]
[Mod Rx]

Rise Time

Fall Time

[Exp Rx]
[S/F Type]
Brake Time
Rotor Direction /Mic Angle [S/F Cont.Code]
Ho rn Character /Mic Distance [Dump Out]
[P.F.SW Type]
VALUE
DOWN UP
[Control Ch]
Fast Speed
[Prog. Ch]
Rise Time [Mod Rx]
Fall Time
[Exp Rx]
Brake Time [S/F Type]
Rotor Direction /Mic Angle [S/F Cont.Code]
Ho rn Character /Mic Distance [Dump Out]
[P.F.SW Type]
VALUE
DOWN UP
Touch & Hold Touch & Hold
[ MIDI ]
HORN HORN LOW LOW
ROTOR ROTOR ROTOR ROTOR
FUNCTION FUNCTION
SELECT SELECT
MIDI Touch & Hold Touch & Hold
[ ]
LOW LOW
HORN HORN
ROTOR ROTOR
ROTOR ROTOR
FUNCTION FUNCTION
SELECT SELECT