Slow Speed; Fast Speed - Leslie 2101 Owner's Manual

Ë Slow Speed
This Advanced Feature allows you to select the Slow Speed Setting that you prefer for either the Horn
or the Low Rotor. You can select from "0," (rotor stopped) through "99" for the Horn and from "0l"
through "9" for the Low Rotor.
TRY THIS:
1.
2.
3.
Ë Fast Speed
This Advanced Feature allows you to select the Fast Speed Setting that you prefer for either the Horn or
Low Rotor. You can select from "0," or stop, through "21" for both Horn and Low Rotors.
TRY THIS:
1.
2.
3.
The above data can be stored to a Preset. Please see page 24 for information on how to save Presets.
Touch the FUNCTION SELECT switch to select either
HORN or LOW ROTOR. The LED (red for Horn,
green for Low) will light.
Select Slow Speed using the Function Selector.

Slow Speed

Cross Over Freq./ Cabi. Resonance
Use the VALUE Rotary Knob to select the value you want. Make sure the Leslie is set at
Slow Speed so that you can hear the effect when you make changes.
Touch the FUNCTION SELECT switch to select either
HORN or LOW ROTOR. The LED (red for Horn,
green for Low) will light.
Select Fast Speed using the Function Selector.
Slow Speed
Cross Over Freq./ Cabi. Resonance
Use the VALUE Rotary Knob to select the value you want. Make sure the Leslie is set at
Fast Speed so that you can hear the effect when you make changes.
[Control Ch]

Fast Speed

[Prog. Ch]
Rise Time [Mod Rx]
Fall Time
[Exp Rx]
Brake Time [S/F Type]
Rotor Direction /Mic Angle [S/F Cont.Code]
Ho rn Character /Mic Distance [Dump Out]
[P.F.SW Type]
VALUE
DOWN UP
5
[Control Ch]
Fast Speed
[Prog. Ch]
Rise Time [Mod Rx]
Fall Time
[Exp Rx]
Brake Time [S/F Type]
Rotor Direction /Mic Angle
[S/F Cont.Code]
Ho rn Character /Mic Distance [Dump Out]
[P.F.SW Type]
VALUE
DOWN UP
8
13
MIDI Touch & Hold Touch & Hold
[ ]
LOW LOW
HORN HORN
ROTOR ROTOR ROTOR ROTOR
FUNCTION FUNCTION
SELECT SELECT
MIDI Touch & Hold Touch & Hold
[ ]
LOW LOW
HORN HORN
ROTOR ROTOR
ROTOR ROTOR
FUNCTION FUNCTION
SELECT SELECT