Special Note: Connecting Older Digital Hammond Organs Via Midi; Connecting Using The Xb-2, Xb-5 Or A-205; Connecting The Xb-3/Xc-3 Or Xb-3A/Xc-3A - Leslie 2101 Owner's Manual

26
3.
Use either the PAGE "
Low Rotors.
Use the VALUE "•" Select Touch Button to increase the number setting.
Use the VALUE "–" Select Touch Button to decrease the number setting.
You can use this same method to control whatever Advanced Features your Hammond Organ
gives you access to via the Information Center Display.
NOTE: All of the Advanced Features available on your Leslie Speaker may not be able to be controlled using
your Hammond Organ. Also, your Hammond Organ may not give you the full range of choices available
when you use the controls of the Leslie Speaker to program the Advanced Features.
Ë SPECIAL NOTE: Connecting older digital Hammond Organs via MIDI

Connecting using the XB-2, XB-5 or A-205

When connecting the above instruments, the ONLY Advanced Feature you will be able to utilize is, the
ability to control the speed of the rotors using the Modulation Wheel. Because the control codes are
different on these organs, none of the Information Center-driven Advanced Features will work through
the Leslie.

Connecting the XB-3/XC-3 or XB-3A/XC-3A

Because these organs have no Information Center-driven Leslie Advanced Features, the only Advanced
Feature you will be able to utilize is, the ability to control the speed of the rotors using the Modulation
Wheel. The CU-2 Control Unit must be connected in order to use this feature, since the Modulation
Wheel is part of this control unit.
Also, the second wheel must be programmed as a Modulation Wheel and not as the Leslie Speed Control
switch. Please consult the Owner's Playing Guide of the organ for instructions on how to do this.
Now select the option you wish by doing the following:
" or the PAGE " " Select Touch Button to select between Horn and