Advanced Features - Leslie 2101 Owner's Manual

using the

advanced features

Your Leslie Speaker has a number of Advanced Features which allow you a great deal of control over the
sound and performance you desire. To see the Default Setting for each of these Advanced Features,
please consult page 27 of this Guide.
The Leslie Advanced Features allow you to make the following changes to the organ:
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
The following pages give a more detailed explanation of how these Advanced Features work.
Horn Rotor - Allows you to adjust the Slow and Fast RPMs (Revolutions Per Minute)
and the Rise and Fall Time as well as the Brake Time of the Horn Rotor (see pages 13,
14, 15, 14 and 16).
Low Rotor - Allows you to adjust the Slow and Fast RPMs (Revolutions Per Minute)
and the Rise and Fall Time as well as the Brake Time of the Low or Bass Rotor (see
pages 13, 14, 15, 14 and 16).
Microphone Settings - Allows you to adjust the Angle and Distance parameters to
simulate different microphone placements (see pages 17).
Rotor Direction - Allows you to select the direction in which the Horn Rotor will turn.
(see page 15).
Horn Character - Allows you to select the Resonance for the Horn Rotor (see page 16).
Crossover Freq. - Allows you to select the crossover frequency for the Horn Rotor and
the Low Rotor (see page 16).
Cabinet Resonance - Allows you to simulate the resonance of a Leslie Model 122
Speaker cabinet (see page18).
Control Ch. - Allows you to select the MIDI Control Channel as well as turn the MIDI
Control Channel "ON" and "OFF" (see page 19).
Prog. Ch. - Allows you to select the MIDI Program Channel as well as turn the MIDI
Program Channel "ON" and "OFF" (see page 19).
Mod Rx - Allows you to use a Modulation Wheel to send Motor Control data (see page
20).
Exp Rx - Allows you to use an Expression Pedal to send Motor Control data (see page
20).
S/F Type - Allows you to set up the Latch/Unlatch mode for a Slow/Fast Foot Switch
(see page 21).
S/F Cont. Code - Allows you to select the Control Code for a Slow/Fast Foot Switch
(see page 21).
Dump Out - Allows you to send MIDI Data out via a Data Dump (see page 22).
P.F.SW Type - Allows you to set up the mode for the Preset Foot Switch (see page 23).
11