Presets; Default - Leslie 2101 Owner's Manual

24
Ë Presets
Because your Leslie Speaker has a number of Advanced Features allowing you to change the speaker's
sound and performance, you may find it helpful to "bundle" your favorite settings together. Therefore,
your Leslie Speaker has two Presets which allow you to save two different combinations of Advanced
Feature settings for easy retrieval later.
TRY THIS:
1.
2.
3.
4.
In addition, you may select Presets using a Foot Switch. Simply plug a Foot Switch into the PRESET
Foot Switch receptacle located on the back of your Leslie Speaker.
NOTE: You may also select Presets using Program Numbers. To do this, you must enable the MIDI Program Number
and send Program # 1 or 2 to select Preset 1 or 2. For more information, please see page 19.
Ë Default
To restore the default settings of your Leslie Speaker:
1.
2.
3.
The factory default settings have now been restored.
Select the Preset Number using the PRESET Touch Button.
1 1
Make whatever changes you would like to the Leslie Advanced Features using the
procedures described on the previous pages.
Touch and Hold the red MEMORY Touch Button for approximately 1 second.
The LED of the Preset you selected will flash, indicating that your Preset is now saved.
Make sure the power to the Leslie is turned "OFF."
Touch and Hold the red MEMORY Touch Button.
Continue to hold the MEMORY Touch Button, and turn the Power to the Leslie
"ON."
PRESET PRESET
2 2
PRESET PRESET
SELECT SELECT