Table of Contents
Advertisement
Relay Reset Mode
1. Unique settings checkbox – Indicates whether unique settings are used per relay or otherwise.
If checked, unique settings are used per relay. To have all relays use the same settings, keep this
option unchecked and modify the settings in Relays All.
2. Reset Mode – Displays a drop down list menu for the types of reset modes available. Relays can
be reset either based on a specified amount of time, synchronized to the sensor or manually by the
user.
3. Duration – Displays the length in seconds before the relay is reset back to its normal state.
4. Restore Defaults – Restores the default settings.
5. Apply – Saves the settings.
80
Alarm Notification
1. Unique settings checkbox – Indicates whether unique settings are used per camera or otherwise.
If checked, unique settings are used per camera. To have all cameras use the same settings, keep
this option unchecked and modify the settings in Camera All.
2. Red Border – Indicates whether a motion icon alarm notification is enabled or not. If checked, it
means that a motion icon will appear on top of the video in live view if motion is detected.
3. E-mail – Indicates whether e-mail alarm notification is enabled or not. If checked, it means that
an e-mail notification will be sent to the specified e-mail along with a jpeg screenshot attached to it
when an alarm occurs for that specific camera.
4. E-mail Address – Displays e-mail address used for the e-mail alarm notification.
5. Email Notification Delay – Sets the minimum delay between email notifications. If an alarm is
triggered for a specific camera and an email notification has already been sent, an email will not be
sent again for that camera if the same type of alarm is triggered within the delay period. This is to
prevent the spamming of email notifications.
6. Restore Defaults – Restores the default settings.
7. Apply – Saves the settings.
81
Advertisement
Table of Contents
