Hdd; Cameras; Sensors; Relays - APEC TVR 3000 User Manual

HDD

How to Install the HDD:
1. Place HDD1 to the left side of the
bracket and connect it using the screws.
Note: The jumper setting of your HDD1
should be on Slave.
2. Place HDD2 to the right side of the
bracket and connect it using the screws.
Note: The jumper setting of your HDD2
should be on Master.
3. Place the HDD bracket inside the DVR
unit.
4. Attach the left side of the bracket to the
DVR chassis using the screws.
5. Attach the right side of the bracket to
the DVR chassis using the screws.
6. Connect the IDE cable to HDD1 and
HDD2.
7. Connect the power cable to HDD1 and HDD2.

Cameras

How to Connect Cameras to the DVR:
1. Connect cameras to DB25 cable's Video
Inputs, labeled CAM1 to CAM8.
2. Connect the DB25 cable to the unit's DB25
Video and Audio Input Connector.
16

Sensors

How to Connect Sensors to the DVR:
1. Connect sensors to Sensor Inputs, marked S1 to S4 and Ground.
2. To connect sensors, simply insert the wire inside the connector hole and push the connector button
to lock the wire.

Relays

How to Connect Sensors to the DVR:
1. Connect relays to the Relay Outputs, marked R1, R2 and Common.
2. To connect relays, simply insert the wire inside the connector hole and push the connector button to
lock the wire.
17