Table of Contents
Advertisement
Information
This section displays hardware and software version. It also shows hard disk capacity as well as used
and free hard disk space.
Date and Time
Date and Time indicate settings for year, month, day, hour, minute, second and timezone. Ensure that
you set the date and time before you operate the system to match your local time. Default year is set
at 1970.
Under Date/Time Selection, you can choose to set the date and time such as year, month date, hour,
minute and second.
32
cont... Date and Time
After setting the date and time, you can also set the timezone accordingly.
Procedure Using the Remote Controller or Control Panel:
1. To select the settings that you want to modify, simply navigate by pressing on [UP] or [DOWN].
2. To set date and time, use [+] or [RIGHT] to increase value and [-] or [LEFT] decrease value.
3. Once you are done, press on [ENTER/SELECT] to save your settings. Press [BACK] or [LIVE] to
exit without saving.
33
Advertisement
Table of Contents
