Table of Contents
Advertisement
REMOTE CONTROLLER
DVR – External Unit
Description
1. Live
Switch to Live View Mode
2. Setup
Switch to Setup Mode
3. ENTER / Cycle
Save settings or Go to / Cycle cameras
4. Up / Down / Left / Right Arrows
Move up / Move down / Move left / Move right
5. Record
Start/Stop FORCED recording
6. Search
Search and playback recorded video
7. Backup
Switch to Backup Mode
8. Focus
For increasing/decreasing focus *For PTZ camera only
9. Iris
For increasing/decreasing brightness *For PTZ camera only
10. Zoom
For zooming in or out
11. Speed Up
To increase playback speed 2x, 4x, 8x or 16x
12. Speed Down
To decrease playback speed 1/2x, 1/4x, 1/8x, 1/16x
13. Play / Freeze
Play video / Freeze or pause video
14. Next
Go to next frame (frame by frame)
15. Previous
Go to previous frame (frame by frame)
16. Forward
Forward playback of video files 10 seconds; also used in search to move 5 hours/minutes up
17. Rewind
Rewind playback of video files 10 seconds; also used in search to move 5 hours/minutes down
18. Audio
Enter Audio Mode
19. Relay
Enter Relay Mode
20. PIP
Picture in Picture
21. PTZ
Enter PTZ
22. Display
Adjust image brightness, contrast, hue and saturation
23. Number Buttons
Go to camera number (1), (2) ... and so on
24. Number 10 button
Also functions as a "0" button when used as a single digit in passwords, labels, ip address, etc.
*For the remote control,
use 1 lithium ion 3V battery
14
INSTALLATION
How to install the DVR on the wall:
1. For cemented walls, use a drilling machine to drill
screws on the wall. Follow the diagram beside for
drilling positions. (NOTE: If possible, please measure
the distances of screw holes in your unit.)
2. For wooden walls, you may use a hammer to
initially puncture the wall.
3. Insert screws and fasten DVR unit when done.
Ensure that the unit is carefully mounted on the wall
before attaching other peripherals. Use at least 1in
screws.
The approximate net weight of the DVR is 5kg.
15
Advertisement
Table of Contents
