Osd - APEC TVR 3000 User Manual

OSD

OSD sets screen display for the DVR.
Procedure Using the Remote Controller or Control Panel:
1. To change settings, select the option that you want to modify by pressing [UP] or [DOWN].
2. Switch between ON or OFF by pressing [LEFT], [RIGHT], [+] or [-].
3. Press [ENTER] or [SELECT] to save settings. Press [SETUP] or [BACK] to exit without saving.
OSD Setup
1. Date/Time: Displays time & date
2. Status/Icons: Displays status indicators and icons
3. Camera OSD: Displays camera title
4. Camera Label: Allows you to change camera label
5. Cycle: Allows you to change cycle delay time
By default, the first three options are checked.
38
To edit Camera Labels, please follow the steps below:
1. Enter SETUP > OSD.
2. Select Camera Label and press [ENTER/SELECT].
3. Select which camera you want to change by pressing [LEFT], [RIGHT], [+] or [-], then press [ENTER/
SELECT].
4. Using the On-Screen Keyboard, fill in your new camera label and press [ENTER/SELECT] to save
your settings. Up to 6 characters for camera labels are allowed and only English characters are
allowed.
39