Main Board (Top View); Standalone Dvr (Front View); Side Button Panel; Dvr Unit (Back View) - APEC TVR 3000 User Manual

MAIN BOARD (TOP VIEW)

DVR – Internal Unit Ref. Des.
1. 4-Pin ATX Power Connector J17
2 40-Pin IDE Connector J10
3. Tact Switch "RESET" SW1
4. Terminal Block "Sensor Input & Relay J1
Output"
5. Ethernet Connector J3
6. 2 pc. USB Connector J16
7. Debug1 or uart Connector B1
8. IR connector J6
9. Battery and Battery holder J7
10. DB25 Video and Audio Input Connector J3
11. Audio Output RCA Jack P3
12. TV Out RCA Jack P2
13. Audio Input J5
14. 8 sensor, 4 relay J6
15. 8 sensor, 4 relay J7
Description
Connection to power supply 12V-5V-GND
Connection to hard disk (HDD1)
For resetting/rebooting system
Connecting Sensor devices and Relay Output devices to control
sensors and trigger alarms
Where you can connect the RJ45 cable
Connection to USB device
RS232 port for GSM connection
Connection to IR sensor
Battery for Real Time Clock
Connection with CCTV Camera and Audio
Audio Output terminal
1 TV Out RCA connection
Audio Input Terminal
Input and output
Input and output
12
STANDALONE DVR
(FRONT VIEW)
DVR – External Unit Description
1. IR Sensor Infrared Sensor for Remote Controller

SIDE BUTTON PANEL

DVR UNIT (BACK VIEW)

13