Tools - APEC TVR 3000 User Manual

Tools

This provides tools for formatting hard
drives, changing the video signal type and
updating the DVR Server firmware.
1. To format new hard disk, select Format New Hard
Disk. You will be asked to confirm your request, se-
lect YES to confirm or NO to cancel.
2. To format USB hard disk, select Format USB Hard
Disk. You will be asked to confirm your request, se-
lect YES to confirm or NO to cancel.
3. To revert the DVR to manufacturing default configu-
ration, select Restore System Defaults. You will be
asked to confirm your request, select YES to con-
firm or NO to cancel.
To change the Video Signal type, please follow the steps below:
1. Under System settings, select Tools->Video Signal
using [UP], [DOWN] and [ENTER/SELECT].
2. Change to your intended video signal by selecting
the option and press [ENTER/SELECT] to save
your settings. Press [SETUP], [LEFT] or [BACK] to
exit without saving.
3. You will need to restart your DVR before the change
will take effect. Push the reset button of the DVR to
reboot.
40
To Update the Version of your DVR Server, please follow the steps below:
1. Under System settings, select Tools->Update DVR.
2. Press [UP] or [DOWN] to select update either by
Network or Flash Disk and press [ENTER/SE-
LECT]. If you choose updating by Flash Disk,
make sure the Flash Disk is properly attached to
the USB port.
3. If you choose updating by Network, enter the
Server IP and password and press [ENTER/SE-
LECT]. Press [UP] or [DOWN] to move between
fields. Use the numeric keys on the remote con-
troller to input data, or press [ENTER/SELECT]
while the fields are empty to use the On-Screen
Keyboard.
4. A confirmation message will pop up. Select YES to update or NO if you do not want to update.
(Make sure that your DVR can connect to the Server IP. Check your network settings.) The total
length of update will take about 10~15 minutes via LAN connection.
5. You will need to restart your DVR to before the changes will take effect. Push the reset button of the
DVR to reboot.
Please contact your nearest distributor for the Server IP and password.
41