Image Control; Screen Capture; Forced Recording; Sensors - APEC TVR 3000 User Manual

Image Control

Via Image Control, you can change brightness, contrast, hue, and saturation
settings of the cameras currently displayed.
1. Simply click on + or – to increase or decrease the selected image control
option on the cameras currently displayed.
2. To apply the changes to all cameras, click on the Apply to All button.
3. Click the Restore Defaults button to return settings to the factory default
settings for all cameras.

Screen Capture

1. To capture an image of the display
screen, click on the Screen Capture
button.
2. A separate window will open with a
printable form containing the captured
image, time stamp and camera informa-
tion.
3. To print the captured image, click on
Print.
4. To save the captured image, click on
Save and then select the folder to save
to.
5. Click on the Close button to exit the
Screen Capture window.

Forced Recording

To manually start recording, click on the Record button. Click on Record button again to
stop recording.
64

Sensors

To know which sensors are active, click on the Sensor button. Active sensors are represented as
highlighted buttons. If the beep alarm notification is turned on, the system beep will also be heard.

Relays

To know which relays are active, click on the Relay button. Active relays are represented as highlighted
buttons. Relays can be activated/deactivated by clicking on the respective relay button.

Audio

To know which audio is active, click on the Audio button. The active audio channel is highlighted.
Only one audio channel can be on at any particular time. Only the audio channels of the video cur-
rently being displayed is available. The audio channel can be activated/deactivated by clicking on the
respective audio button.
65