Table of Contents
Advertisement
PTZ Function
To use PTZ Function, ensure that your camera is a PTZ (Pan/Tilt/
Zoom) camera.
1. Pan/Tilt buttons – Pans/Tilts camera
2. PTZ Schedule – Indicates that there is/are scheduled PTZ
command(s)
3. Auto Pan – Executes a pre-programmed sequence of PTZ
commands
4. Camera Selector – Selects camera
5. Zoom Control – Zooms In/Zooms Out
6. Focus Control – Adjusts focus
7. Iris Control – Adjusts amount of light entering the camera
8. Pan/Tilt Speed – Adjusts pan/tilt speed
9. Zoom Speed – Adjusts zoom speed
10.Focus Speed – Adjusts focus speed
11. Pattern Tracking – Opens Pattern Tracking table
12.Preset – Opens Preset table
13.Group Run – Opens Group Run table
Presets
To display the list of presets available, simply click on the Preset button. Presets
are predefined locations where a PTZ camera has been focused.
To set up a preset, refer to the Server Setup > Presets section.
1. Select a preset from the list.
2. Click on the Go button to run the selected preset.
66
Pattern Tracking
To display the list of pattern tracking available, simply click on the
Pattern Tracking button. Pattern tracking is a functionality which
allows the DVR Server to control a PTZ camera to move from one
predefined preset to another. It can be used to have a PTZ camera
scan a room or area by automatically focusing on different locations
in a sequential manner.
For details on setting up a pattern tracking sequence, refer to the
Server Setup > Pattern Tracking section.
1. Select a pattern from the list.
2. Click on the Go button to run the selected pattern.
Group Run
To display the list of group runs available, simply click on the
Group Run button. A group run is a functionality that allows the
DVR Server to simultaneously redirect the focus of several PTZ
cameras to specific areas.
To set up a group run, refer to the Setup > Group Run section.
1. Select a group run from the list.
2. Click on the Go button to run the selected group run.
67
Advertisement
Table of Contents
