Battery Life And Replacement; Summary Of Pushbutton Programming Commands - Kaba E-PLEX 2000 Operation Manual

BATTERY LIFE AND REPLACEMENT

A variety of factors (shelf life, openings per day, environment, battery brand,
lock settings, etc.) will determine how long your lock operates on a set of bat-
teries. In average conditions, you can expect a minimum of 100,000 openings
for E-Plex 2000 models with 3 "AA" Alkaline Batteries.
A Low Battery condition is identified by a flash of both red and green LEDs
when a valid access code is entered and the lock will still give access. When the
low battery condition is observed, the batteries should be replaced as soon as
possible.

Summary of Pushbutton Programming Commands

Name Command
Configure 000 #
MMMMMMMM#
MMMMMMMM#
004 #
TT#
005 #
TT#
006 #
TT#
007 #
TT#
008 #
VV#
009 #
LL#
099 #
Description of Command
'Modify Master User Access Code (lock's
activation)' (Always 8 digits)
'Unlock time setup' (TT = 02 to
20 seconds)
'Passage Mode Timeout setup' (TT = 01 to
24 hours - duration time in hours; 00 = no
time limit)
Note: Not applicable to EPS2000
PowerStar Models
'Tamper time setup' (TT = 00 to 90 seconds)
'Tamper wrong try setup' (TT = 03 to 09)
'Buzzer volume control' (VV = 00 to 03;
00 = off; 01 = Low; 02 = Normal; 03 =
High)
'Modify access length' (LL = 04 to 08 digits)
'Reset to factory default values', except
access code length. (Master, manager and
access user are retained if already pro-
grammed. Users are not reset.)
Authorization
Master
Master, Mgr
Master, Mgr
Master, Mgr
Master, Mgr
Master, Mgr
Master
Master
23