Plug Battery Holder; Test Lock Functionality - Kaba Confidant RFID Kit 1 Installation Manual

7- PLUG BATTERY HOLDER

N.B.: Ensure the battery holder is pushed up
fully and is not impeding the cylinder.
8- TEST LOCK FUNCTIONALITY (To be done while door is still open)
Make Sure Room Door is Open
A - Present Keycard: Test Key (ILCO) / Zone 1 Key (Saflok)
B - Confirm LED Response: Green & Red (ILCO) / Green (Saflok)
C - Rotate Outside Lever to Check Bolt Retraction
D - Release Outside Lever, Should Move Freely
E - Rotate Inside Lever to Check Bolt Retraction
F - Check Bolt Projection from Thumbturn & Key
12
✓
✗
Confidant RFID Kit 1 Installation Guide - PK3616_T_07_15
✓
✗