Chapter 6 BIOS and System Setup
PWR-ON by Modem/LAN
An input signal on the serial Ring Indicator (RI) line (in other words, an
incoming call on the modem or incoming signal from LAN) awakens the
system from a soft off state.
Resume by Alarm
This allows a computer to be turned on automatically through the timer
set in the BIOS to make the system more scheduleable. By default, this
field is set to Disabled.
IRQ 8 Break Suspend
You can enable or disable the monitoring of IRQ 8 (Real Time Clock) so
it does not awaken the system from Suspend mode.
Reload Global Timer Events
This section determines the reloading of the 'timers' after entering the
Full On You can enable or disable the monitoring of IRQ 8 (Real Time
Clock) so it does not awaken the system from Suspend mode.
48
TI6NBF+ Pentium II/III ATX Motherboard User's Manual