J8: Cpu Fan Power Connector; J9: Irda Connector; J10 Wake On Lan Connector; J12: Chassis Fan Power Connector - TMC TI5VG+ User Manual

Chapter 5 Installation

5.9 J8: CPU Fan Power Connector

J8 is a 3-pin header for the CPU fan power connector. The fan must be a
12V fan.
3 2 1

5.10 J9: IrDA Connector

This connector is used for an IrDA connector that supports infrared
wireless communication with IrDA devices.
+5V IRRX IRTX
N.C. GND

5.11 J10 Wake on LAN Connector

J10is a 3-pin header for Wake on LAN function on the motherboard.
3 2 1

5.12 J12: Chassis Fan Power Connector

J12 is a 3-pin header for the chassis fan power connector. The fan must be
a 12V fan.
3 2 1
30
Pin # Signal Name
1 Fan sensor
2 +12V
3 Ground
Pin # Signal Name
1 +5V
2 No connect
3 Ir RX
4 Ground
5 Ir TX
Pin # Signal Name
1 5VSB
2 Ground
3 Wake on LAN
Pin # Signal Name
1 Fan sensor
2 +12V
3 Ground
TI5VG+ User's Manual