Acpi Function; Power Management; Pm Control By Apm - TMC TI6NBF+ User Manual

POWER MANAGEMENT SETUP

ACPI Function

: Enabled

Power Management

: User Define

PM Control by APM

: Yes
Video Off Option : Suspend
Video Off Method : V/H SYNC +Blank
Modem Use IRQ : 3
Soft-Off by PWRBTN : Instant-Off
HDD Power Down : Disabled
Doze Mode : Disabled
Suspend Mode : Disabled
** PM Events **
VGA : OFF
LPT & COM : LPT / COM
HDD & FDD : ON
DMA / master : OFF
PWR-On by Modem/LAN : Disabled
RTC Alarm Resume : Disabled
For VIA Apollo Pro Plus (82C693) chipset
ACPI Function
This field allows you to enable or disable the ACPI (Advanced
Configuration Power Interface) function on the motherboard.
Power Management
This field allows you to select the type of power saving management
modes. There are four selections for Power Management.
Min. Power Saving
Max. Power Saving
User Define
NOTE: In order to enable the CPU overheat protection feature, the
Power Management field should not be set to Disabled.
PM Control by APM
This field allows you to use the Advanced Power Management device to
enhance the Max. Power Saving mode and stop the CPU's internal clock. If
the Max. Power Saving is not enabled, this will be preset to NO.
TI6NBF+ Pentium II /III ATX Motherboard User's Manual
Chapter 6 BIOS and System Setup
ROM PCI/ISA BIOS
AWARD SOFTWARE, INC.
Primary INTR
IRQ3 (COM2)
IRQ4 (COM1)
IRQ5 (LPT 2)
IRQ6 (Floppy Disk)
IRQ6 (Floppy Disk)
IRQ7 (LPT 1)
IRQ8 (RTC Alarm)
IRQ9 (IRQ2 Redir)
IRQ10 (Reserved)
IRQ11 (Reserved)
IRQ12 (PS/2 Mouse)
IRQ13 (Coprocessor)
IRQ14 (Hard Disk)
IRQ15 (Reserved)
ESC : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
Minimum power management
Maximum power management.
Each of the ranges is from 1 min. to 1hr.
Except for HDD Power Down which ranges
from 1 min. to 15 min. (Default)
: ON
: Primary
: Primary
: Primary
: Primary
: Primary
: Primary
: Disabled
: Secondary
: Secondary
: Secondary
: Primary
: Primary
: Primary
: Disabled
: Select Item
PU/PD/+/- : Modify
(Shift) F2 : Color
45