Init Display First; Reset Configuration Data - DFI NP101-D16C User Manual

PnP/PCI Configurations
This section shows how to configure the PCI bus system. It covers
some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.

Init Display First

Reset Configuration Data

Resources Controlled By
x IRQ Resources
PCI/VGA Palette Snoop
** PCI Express Relative Items **
Maximum Payload Size
↑↓→←
: Move Enter: Select
F5: Previous Values
The settings on the screen are for reference only. Your version may not be
identical to this one.
Init Display First
Onboard
PCI Slot
Reset Configuration Data
Enabled The BIOS will reset the Extended System Configuration
Data (ESCD) once automatically. It will then recreate a
new set of configuration data.
Disabled The BIOS will not reset the configuration data.
Phoenix - AwardBIOS CMOS Setup Utility
PnP/PCI Configurations
Onboard
Disabled
Auto(ESCD)
Press Enter
Disabled
128
+/-/PU/PD: Value
F6: Fail-Safe Defaults
When the system boots, it will first initialize the
onboard VGA.
When the system boots, it will first initialize PCI.
BIOS Setup
Item Help
Menu Level
F10: Save ESC: Exit F1: General Help
F7: Optimized Defaults
3
81