Ahci For F6 During Windows Setup Floppy Driver - DFI NP101-D16C User Manual

4
Supported Software

AHCI for F6 During Windows Setup Floppy Driver

This is used to create a floppy driver diskette needed when you install
®
Windows
the operating system onto a hard drive when in AHCI mode.
Click "AHCI for F6 During Windows Setup Floppy Driver" on the main
menu.
1. Inser t a blank floppy
diskette then click OK.
2. Make sure you have a
backup of the data in
the disk. Clicking Yes will
erase all data.
3. The system is currently
formatting and writing
the necessary driver files
into the diskette.
128
XP using the F6 installation method. This will allow you to install