Load Fail-Safe Defaults - DFI NP101-D16C User Manual

3
BIOS Setup
Current SYS Temperature to VBAT (V)
These fields will show the temperature, fan speed and output voltage
of the monitored devices or components.

Load Fail-Safe Defaults

The "Load Fail-Safe Defaults" option loads the troubleshooting de-
fault values permanently stored in the ROM chips. These settings are
not optimal and turn off all high performance features. You should
use these values only if you have hardware problems. Highlight this
option in the main menu and press <Enter>.
Esc : Quit
F10 : Save & Exit Setup
If you want to proceed, type <Y> and press <Enter>. The default
settings will be loaded.
84
Note:
The onboard hardware monitor function is capable of detecting
"system health" conditions but if you want a warning message
to pop-up or a warning alarm to sound when an abnormal
condition occurs, you must install the Hardware Monitor for
Windows utility. This utility is included in the CD that came with
the system board. Refer to the Hardware Monitor for Windows
section in chapter 4 for more information.
Phoenix - AwardBIOS CMOS Setup Utility
Standard CMOS Features
Advanced BIOS Features
Advanced Chipset Features
Integrated Peripherals
Power Management Setup
PnP/PCI Configurations Load Fail-Safe Defaults (Y/N)?
PC Health Status
Load Fail-Safe Defaults
Load Optimized Defaults
Set Supervisor Password
Set User Password
Save & Exit Setup
Exit Without Saving
↑ ↓ → ←
: Select Item
Load Fail-Safe Defaults